0%

0%

hasselaer

newby

belgium

Following Follow me

Similar accounts worth following

This user joined on 08/15/2020.

Projects I Like & Follow

Connect your unsecured wireless stuff to the internet in a secure and anonymous way

Raspberry Tor Router

A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance

3D Printed Robot Joint with Active Compliance

tim-wilkinson Tim Wilkinson

A way to legaly get rid of people blasting "wonderful" music trough bluetooth speakers. (Raspberry Pi 3A+/3B+ needed)

Stopping people play music via bluetooth speakers

A joule thief powered by an easy-to-make aluminium air cell.

Aluminium powered joule thief

willstevens will.stevens

Put your Verilog on real hardware, real cheap

FPGA Bootcamp #3

al-williams Al Williams

Use your PIC-Projects on Mini-PCIe (USB/SMBus)

Mini-PCIe - PIC18LF2550 - DevBoard

Neuron models including Izhikevich dynamics, chemical and electronic synapses, and STDP learning.

Spiking neural net in parallel FPGA hardware

bruce-land Bruce Land

Use your Raspberry Pi to "convert" your WiFi connection to wired. Use your old router as access point with Ad-Blocking.

Raspberry Pi route WiFi through Ethernet

Dimitris Matsoukas

A little two wheeled diferential robot with SLAM

Mapbot

brian-kame brian kame

A Clock displaying time using six Numitron Tubes. It's controllable via WiFi.

Numitron Clock

The ShopArm is an easily implemented robot arm. Just train it and then use it

ShopArm: A Practical 3D Printed Robot Arm

I'm experimenting with some ideas to create a physical representation of a tesseract.

A Phyical Tesseract (Hypercube)

sean-hodgins Sean Hodgins

How I built an Arduino energy monitor and data logger to collect energy data for different loads and plotted that data using Excel.

Building an Arduino Energy Monitor & Data Logger

sridhar-rajagopal Sridhar Rajagopal

A 5 note chiming clock that gets time from either GPS or WiFi/NTP (via Raspberry Pi)

GPS (or not) chime clock

nick-sayer Nick Sayer

This project is a spreadsheet to help design enclosures for 3D printers.

3D Printer Enclosure Design Spreadsheet

alan-campbell Alan Campbell

Palm V - Wifi upgrade

Palm W

rune-kyndal Rune Kyndal

3D printer designed for beginners, using off-shelf hobbyist electronic components (DC geared motor, arduino, etc.) That can be built easily.

Beginner 3D printer (with off-shelf Electronics)

An analog clock that displays the time using WS2812 LEDs instead of physical hands.

RGB LED Analog Clock

jackw01 jackw01

View all

Bits