0%

0%

Jon Nordby

Machine Learning Engineer specialized in IoT

Oslo, Norway

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 08/12/2014.

My Projects

Can we build Machine Learning enabled sensor for under 1 USD?

1 dollar TinyML

jon-nordby Jon Nordby

Things I've Built

emlearn

Machine Learning inference engine for Microcontrollers and Embedded devices

Projects I Like & Follow

Supplyframe DesignLab: 2023 Hackada…

Lowering the cost of Refreshable Braille Cells by using Electromagnetic Cam Actuators & 3D Printing

Electromechanical Refreshable Braille Module

Supplyframe DesignLab: 2023 Hackada…

EMG sensors for controlling devices and PC with muscle commands

uMyo - wearable EMG sensor with wet/dry electrodes

ultimate-robotics Ultimate Robotics

Miniature closed-loop controller for brushless DC motors

Ø32 BLDC Controller

christopher-xu Christopher Xu

A Watch with a quasi-analog always-on display, consisting of 240 concentrically arranged SMD LEDs, running 20 days before charging

LED Watch

NeuralPi is a guitar pedal using neural networks to emulate real amps and pedals on a Raspberry Pi 4.

NeuralPi

keith-bloemer Keith Bloemer

Last new years I decided against getting fireworks. It's just too harmful to the environment. Instead I build this "reusable" rocket.

1D-Fireworks

daniel-westhof Daniel Westhof

Development board for the PY32F002A low-cost 32-bit ARM Cortex M0+ microcontroller

PY32F002A F15P Development Board

stefan-wagner Stefan Wagner

Playing with the new Esp32-C6FH4: https://www.crowdsupply.com/prokyber-s-r-o/esp32-c6-bug

Esp32-C6-Bug + Esp32-Bug-Eth

allexok allexoK

2021 Hackaday Prize

The project attempts to recognize different bird calls by continuously listening to the audio using Arduino Nano33 BLE Sense.

Bird sound classifier on the Edge

errol-joshua Errol Joshua

LEGO blocks for analog design

Op-amp building blocks

mihaicuciuc mihai.cuciuc

Leveraging the Programmable Power Supply (PPS) of USB PD 3.0 and 3.1 to make an ultra-compact bench power supply

PocketPD - USB-C Portable Bench Power Supply

Applying sensor fusion with RSL10 and Bosch sensors to run a TinyML model for predictive maintenance of compressor water pumps.

Predictive Maintenance Of Compressor Water Pumps

Development board for the CH32X033F8P6 low-cost 32-bit RISC-V microcontroller with native USB2.0

CH32X033 F8P6 Development Board

stefan-wagner Stefan Wagner

A simple testing device to verify the presence and continuity of power and data lines in USB charging cables.

USB Power Cable Tester

stefan-wagner Stefan Wagner

This is a project porting the Teachable Machine project to the K210 platform. No coding is needed to play.

Teachable Machine on K210

Predict the possibility of arrhythmias on an 8- bit Microcontroller, without sending the corresponding sensor data to the cloud.

Tiny ML for Big Hearts on an 8-bit Microcontroller

alexmiller alex.miller

Creating a faster, smaller, and more accurate magic wand than the famous experiment provided in Arduino Sketch, given the same hardware.

Making Famous Magic Wand 33x Faster

alexmiller alex.miller

Check out how to repeat a TinyML experiment on building a weather station from the new “TinyML Cookbook” and make the model smaller

Case from the Newly Released TinyML Cookbook

alexmiller alex.miller

View all

Bits

mihai.cuciuc wrote 02/13/2024 at 20:46

Hi! Thanks for your interest in #Opamp building blocks!

Are you sure? yes | no

Jon Nordby wrote 01/15/2024 at 10:42

A bit is like a tweet or a toot?

Are you sure? yes | no