0%

0%

Jorge Miar

Making stuff

Bath, United Kingdom

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/07/2021.

My Projects

A repurposed vintage boombox with functioning buttons that can stream Spotify using a Raspberry Pi and an NFC reader

Vintage Spotify Boombox with NFC Cassettes

Projects I Like & Follow

The 2016 Hackaday Prize

Pi Zero and camera weigh 13 grams making it an ideal setup for data logging, HD video recording and custom On Screen Display for FPV.

Raspberry Pi Zero FPV camera and OSD

The 2016 Hackaday Prize

A $200 smart Linux drone with the Pi Zero and the PXFmini autopilot shield.

Pi0drone

Víctor Mayoral Vilches

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp

Pick and place machine - Smoothieboard/OpenPnp

Hackaday Prize 2019

MIDI electronic portable practice hurdy-gurdy: It's always in tune.

The Digi-Gurdy and Digi[Nerdy]Gurdy

The 2018 Hackaday Prize

This open-source, low-power LTE shield uses cutting-edge CAT-M technology and also integrates GNSS location capabilities!

LTE CAT-M1/NB-IoT Shield for Arduino

A Raspberry Pi internet world radio receiver

Raspberry Pi World Radio

Abraham Martinez Gracia

The 2016 Hackaday Prize

ARM. FPGA. 180 reconfigurable I/O. Wi-Fi. Bluetooth. BLE. Size of a business card.

snickerdoodle

This project is aMicroUSB powered ESP8266 Oled Display. It can be used to display Weather Information or Wifi SSID Information.

MicroUSB powered ESP8266 Oled Board

0miker0 0miker0

Hackaday Prize 2019

3D printed fully customizable exoskeleton arm development kit

3D Printed Exoskeleton Arm

The 2015 Hackaday Prize

Open Framework for implementing automated Thermostat rulesets and data-logging.

Smart-Thermostat for Win 10 IoT Core RP2

4G (100 mbps down/ 50 mbps up) – Ultra fast internet connectivity for your Raspberry Pi, excellent for large downloads and video streaming.

IoT Bit 4G & LTE Hat for the Raspberry Pi

We want the Lego EV3 robot to create a 2D map of a room

Mapping with EV3 robot

Hackaday Prize 2019

Teach elementary and middle-school students about robotics with a DIY battle bots kit.

Educational Battle Bots

Experimenting with 3D printed tools.

3D Printed Opensource Tools

Hackaday Prize 2020

The New Dexterity Low-Cost Robotic Airship for Education and Research

A Helium-Based, Affordable Robotic Airship

Built an autonomous ground vehicle from a recycled wheelchair. Designed to traverse outdoor environments autonomously. ROS based.

AlexBot

how to setup Phabricator on a raspberry pi 3B+ with a RAID on usb sticks to store the data somewhere else than on the SD card

Phabricator on raspberry pi

Nathann Nathann

View all

Bits