0%

0%

Lafe Spietz

I build stuff out of trash

Washington, DC, USA

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 12/16/2018.

My Projects

Self-replicating art built from trash

Trash Box

Projects I Like & Follow

The 2017 Hackaday Prize

An open, superior, low cost alternative to FDM 3D printing that takes advantage of high res LCD technology and modern curable resins.

Low Cost, Open Source, LCD based SLA 3D Printer

The 2018 Hackaday Prize

This motor driver is able to control a motor using PID by I2C. Taking precise control of a motor have never been so easy.

Smart Motor Driver for Robotics

Reverse engineering the SMA-Q2 smartwatch to run open source firmware on it

Color Open Source Smartwatch

emeryth emeryth

The 2018 Hackaday Prize

! a platform for sensing and indicating human arousal !

SHE BON

The 2017 Hackaday Prize

My goal is a 4-bit CPU using recycled cardboard substrate and Diode Transistor Logic. This is an educational platform for me.

The Cardboard Computer - IO is my name

Is there room for another oscilloscope? Real Time nodejs/html5 Sci ToolBox! Arduino | Raspberry Pi | FPGA

GinScope | Science ToolBox | Oscilloscope

Gintaras Valatka

The 2018 Hackaday Prize

Projector-camera augmented reality electronics workbench

AR Workbench

Graphics the hard way; life doesn't have to be this difficult !

VDM3, Vector Drawing Machine #3

Matching the performance of an overmolded strain relief using 3D printing and flexible filaments

3D Printed "Molded" Strain Relief

The 2018 Hackaday Prize

This is low cost 3d printed robot arm based on Ikea Tertial lamp.

Tertiarm - 3d printed robot arm

Python library for Raspberry Pi which provides an easy to use interface for the INA219 voltage and current sensor from Texas Instruments.

Raspberry Pi INA219 voltage/current sensor library

I made a tool that converts an image into multiple PCB layers - pixel brightness to board opacity. (for use with Eagle)

PCB - Art medium

The 2018 Hackaday Prize

TouchYou, is a pair of wearable interfaces that enables affective touch interactions with people at long distance.

TouchYou: a wearable touch sensor and stimulator

Open Source SHRED-Buddy3D UPcycler turns leftover filament bits, bottles & fishing line into pellets for 3D printing.

3D Printed Open Source UPcycler : SHRED-Buddy3D

Create 3D printing filament from PET flakes. Bottle → Flakes → FILAMENT → 3D Printing

3D printer filament maker

1 kB roguelike using an Arduino and 0.96" OLED

1 kB Arduino Roguelike

The 2018 Hackaday Prize

Six axis closed loop motion controller for open source robotics development

Freedom Run

AVR (lordKiCAD)

The 2017 Hackaday Prize

After talking with Jez - Morning.Star about coils and magnets, I decided to try to roll my own relay using cardboard, paper and fasteners.

Uglytech - The cardboard relay

View all

Bits