0%

0%

ljy771219

mechanical engineer

Following Follow me

Similar accounts worth following

This user joined on 12/06/2021.

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

The 2015 Hackaday Prize

Arduino connects to the TX line (of a router, RPI) and display serial data on smartphone over WiFi

Hardware serial port monitor with WiFi

The 2016 Hackaday Prize

Use your lasercutter to make an optics bench.

Lasercut Optics Bench

Is there room for another oscilloscope? Real Time nodejs/html5 Sci ToolBox! Arduino | Raspberry Pi | FPGA

GinScope | Science ToolBox | Oscilloscope

Gintaras Valatka

Two hearts are better than one, so why not have five. Quadcore RPI CM4 and a MCU on a single board for true all-in-one 3D printer control.

Sigmoid S7P 3D Printer Control Board

The 2016 Hackaday Prize

Applying polymorphism to hardware enables users to do more with their devices while avoiding IoT pitfalls.

Polymorphic Hardware

A self-igniting candle implemented using AVR and PIC microcontrollers

AVR vs PIC: The case of the candle

Thierry Thierry

Matching the performance of an overmolded strain relief using 3D printing and flexible filaments

3D Printed "Molded" Strain Relief

Official Hackaday Prize Entry

Embed sensors into your toilet to monitor your health daily

Hospital in a Toilet

For everyone who wants to develop ATtiny10 on Arduino IDE

ATtiny10 Dev Environment on Arduino IDE

Hackaday Prize 2020

It's DIY Pulse Oximeter using cheap and general parts and 3D printer, not need dedicated parts.

DIY Pulse Oximeter w/o dedicated parts

piONE.jp channel

2021 Hackaday Prize

Reliable hardware designed by robots

SOL75 - a 3D customizer

Biofeedback: Measurement and visualization

bioloop

Manfred Novotny

The 2018 Hackaday Prize

https://github.com/mhe747/dawnboard/wiki

BeagleSDR

Convert Microwave into UVC Chamber.

Ultraviolet Microwave (name subject to change)

A project to design, build and fly a 3D printed high power model rocket air-frame, capable of flying with up to a K Class motor.

Fully 3D Printed Level 1-2 NAR Cert Rocket

Mitchell O'Connor

A digital watch using the ATmega 328P and seven-segment displays

Kronoino : An AVR powered Digital Wrist Watch

A new bootloader concept using RF devices for programming (nrf24L01 currently), this is very suitable for IoT low power projects

RF ATmega Bootloader

andreimestereaga

View all

Bits