0%

0%

Manos

Digital-Analog explorer and adventurer.

Athens - Greece

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 12/19/2018.

My Projects

A Windows Emulator for the Lion FPGA CPU/Computer.

LionWin

Projects I Contribute To

A 16-bit (and a 32bit) FPGA CPU I call Lion CPU and a computer, the Lion computer. Everything built from scratch.

Lion FPGA CPU/Computer

It is a 1MByte flash cartridge, it supports standard 8K and 16K carts.

Multi-Cart for 8-bit Atari computers

Projects I Like & Follow

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

A 16-bit (and a 32bit) FPGA CPU I call Lion CPU and a computer, the Lion computer. Everything built from scratch.

Lion FPGA CPU/Computer

The 567 tone decoder is perhaps most famous Phase Locked Loop (PLL) chip. This project looks at an Arduino software PLL.

Software Phase Locked Loop

agpcooper agp.cooper

Using an ePaper Display, investigate getting the lowest possible current usage from an STM32L0.

Coin Cell Powered Temperature/Humidity Display

kevin-kessler Kevin Kessler

The 2018 Hackaday Prize

A charlieplexed 20 LED blinker with ATTiny45. Space efficient daisychained LED placing with shared anode/cathode soldering pads.

LED ring

jens-hauke Jens Hauke

Given Windows with some version of Arduino installed, set the paths to allow using avr-gcc/etc from the command line.

install-avr-tools

The 2018 Hackaday Prize

TouchYou, is a pair of wearable interfaces that enables affective touch interactions with people at long distance.

TouchYou: a wearable touch sensor and stimulator

leonardo-gomes Leonardo Gomes

Connecting a floppy drive emulator (Gotek) to the Atari ST with a few small adapter boards.

Atari ST Floppy Drive Emulator Adapters

A friend asked me to see why a video circuit for the pal version apple IIc didn't work, I designed a new video adapter for him.

Video adapter for PAL Apple IIc

The 2018 Hackaday Prize

A 3D printed drawing robot you can build, program, and modify.

Open Source Turtle Robot (OSTR)

The 2017 Hackaday Prize

A host of IoT devices aimed at helping administer light therapy treatment to Alzheimer's patients (based on MIT study)

Non-Invasive Alzheimer's Light Therapy Devices

adellar-irankunda Adellar Irankunda

It is a 1MByte flash cartridge, it supports standard 8K and 16K carts.

Multi-Cart for 8-bit Atari computers

The 2018 Hackaday Prize

https://github.com/mhe747/dawnboard/wiki

BeagleSDR

mich-mich Mich Mich

The 2018 Hackaday Prize

A 3D-Printed, Animatronic, Karaoke-Singing Robot

KARAOKEBOT

hunter-irving Hunter Irving

Circuito is a DIY controlling pad that works as a supplementary project can control any Arduino device.

Circuito Arduino Controller Pad

ahmed-azouz Ahmed Azouz

The 2018 Hackaday Prize

A low cost system to predict changes in weather and answer your questions about potential volatile patterns.

Storm Watch

brenda-armour Brenda Armour

Where constellations and PCB design collide.

November Sky

Help create a toy for a child with autism to learn cause and effect - play music while being held.

Conductive Touch Music Toy

makers-making-change Makers Making Change

View all

Bits