Close
0%
0%

marazm

_____________________________________________

Polska
Following
Send a private message
Similar accounts worth following
1 Followers
34 Following
0 Projects
0 Likes
marazm
Send a private message

This user joined on 01/03/2021.

26.4k
266
19
275
Pocket sized ESP32 display board with 180µW Always On Display and Gyro Controls
Project Owner Contributor

Low Power ESP32 Handheld

Max.KMax.K

14.3k
826
43
82
A 3D printer for printing with welding wire
Project Owner Contributor

Wire 3D Printer

Dominik MeffertDominik Meffert

8.3k
101
35
85
Modified Chroma74 shelf label to be my weather station display. It is 7.4" 3-Color E-Ink units that cost $12 on eBay.
Project Owner Contributor

7.4" E-Ink Shelf Label used as a Weather Station

YodaLogicYodaLogic

8.1k
92
14
80
Wego ASCII weather app running alone over Raspberry Pi. It only use xinit and some optimizations.
Project Owner Contributor

ASCII Weather Station

hpsaturnhpsaturn

4k
107
14
82
A maker friendly capstan based BLDC driven quadrupedal robot. Based on mjbots electronics
Project Owner Contributor

Stanley - the capstan based quadruped

Damian LickindorfDamian Lickindorf

  • oshpark
3.9k
1.3k
5
38
Wristwatch form-factor conference badge
Project Owner Contributor

Open Hardware Summit 2020 badge

oshparkoshpark

2.3k
23
1
18
LoRaMessenger is an off-grid chat between LoRa equipped ESP32 nodes with a simple wireless web interface.
Project Owner Contributor

LoRaMessenger

NicholasNicholas

2.1k
29
8
27
Turn a SMART Response XE terminal into an 80's flavour pocket computer
Project Owner Contributor

SMART Response XE BASIC

fdufnewsfdufnews

1.9k
1k
2
6
ESP32 runs FabGL to produce VGA display
Project Owner Contributor

ESP32 VGA PS/2

land-boards.comland-boards.com

1.1k
16
6
13
Via Telegram, control thermal printers remotely to print out notes, shopping lists, URLs, payments, barcodes, and episode release dates.
Project Owner Contributor

Telegram-Enabled Thermal Printer w/ Arduino

kutluhan_aktarkutluhan_aktar

1k
1k
2
8
The intent behind the Ultra Servo is to give a maker or a robotics a powerful building block.
Project Owner Contributor

Ultra Servo V2.0

patchartrandpatchartrand

976
7
13
17
Using Nixie tubes and 10 TTL/CMOS standard logics, homemade digital clock has been running continuously for three years
Project Owner Contributor

Nixie Clock by TTL/CMOS

Mitsuru YamadaMitsuru Yamada

837
320
1
18
In this workshop, we'll make 3 different kinds of origami shapes.
Project Owner Contributor

Remoticon: Making Glowy Origami

LutetiumLutetium

608
189
0
4
Stream Deck, but utilizing various Raspberry Pi's!
Project Owner Contributor

DIY Stream Deck With Raspberry Pi (PiDeck)

TurkeyDevTurkeyDev

418
151
0
3
With on-board matching network.
Project Owner Contributor

1.420 GHz Antenna

Robert RouquetteRobert Rouquette

241
242
0
4
Diagnose infectious diseases like malaria and tuberculosis using a DIY microscope and AI running on a cellphone
Project Owner Contributor

AIScope - DIY smart microscope for isolated areas

aiscopeaiscope

194
2
1
3
Low power 1.1" ePaper Node - Powered by Light and a Supercap and thus battery-free
Project Owner Contributor

Solar powered ePaper Clock 24/7

Robert PoserRobert Poser

171
164
1
5
Print-at-home robot hand kits inspired by animatronic creature effects and puppetry. 100% 3D printed, snap-fit kits for FDM PLA
Project Owner Contributor

3D Printed, Animatronic-Inspired, Robot Hand Kits

Chris BoyntonChris Boynton

View all

Share this profile

Share

Bits

Send a private message to marazm

Become cool instantly

Create your Hackaday.io profile like marazm and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2021 Hackaday

Report user as inappropriate

You are about to report the user "marazm", please tell us the reason.