0%

0%

mathewjosilet

am a research scholar,area of research is assistive technology and inclusion

kanhangad

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 10/30/2020.

Projects I Like & Follow

A HAT to easily interface a Raspberry Pi with a KNX bus.

KNX Raspberry Pi HAT

tijl-schepens Tijl Schepens

Quick way to start with MCUs

Adventures with a STC89C52 development board

ken-yap Ken Yap

Hackaday Prize 2020

for demonstration of physical laws in generating electrical energy using hydropower plant

3D printed hydroelectric power plant model

matic-markovi Matic Markovič

A cheap alternative to more expensive BLDC controllers, where only simple operation is required. More features may be added as required.

Modified ESC for Bidirectional BLDC Control

Triple Cycloidal Brushless Actuator 25:1 Ratio

Simple Cycloidal Robot Leg for Quadruped

paul-gould Paul Gould

Angle of arrival 2.4GHz radio signal direction finding

Micro MUSIC

charlie-smith Charlie Smith

Easy to use Arduino Uno Shield to support your rockets from the ground!

WOOF Model Rocket Launchpad Computer V4

canine-defense-technologi Canine Defense Technologi

DSO functions for a CRO

A digital camera for analog oscilloscopes

joseph-eoff Joseph Eoff

Convert Kicad PCB files into GCode with isolated PCB Nets

PCB Isolation Routing Software

michael-schembri Michael Schembri

An OpenSCAD library for parametrically generating ABLOY PROTEC keys suitable for 3D printing

Protec 3D Printing

tiernan Tiernan

Powered from the 24v control circuit of a garage door opener. It can control the door and sense if the door is open/closed

Wi-Fi Garage Door Opener For Home Automation

"New technology in the old case" A Raspberry Pi based squeezeelite client for the logitech media server

Squeezelite client - Raspberry Pi Retro Radio

benjamin-prescher Benjamin Prescher

Hackaday Prize 2020

Social distancing at the edge

COVID19 Authorized Entry Using Face Mask Detection

rahul-khanna Rahul Khanna

A relay clock at the size of a book

Relay clock

Two 1.3" low cost 240x240 LCDs are used to create a 3D Display that needs no glasses.

DIY Arduino Parallax 3D Display

madaeon Madaeon

Unique tool and desktop or wind sill trinket to alert when the ISS is overhead.

3D Printed ISS desktop beacon and IFTTT notifier

A weather station based on an esp8266 and a TFT screen

IoT TFT Weather Station

grgory-paul Grégory Paul

A device that adds volume control over WiFi to balanced audio

WiFi Balanced Audio Volume Control

adam-demuri Adam Demuri

View all

Bits