0%

0%

Matt

Just a maker

Santa Cruz

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 04/04/2016.

Projects I Like & Follow

Full-on Spotify scrolling and streaming via a Raspberry Pi Zero W and the original iPod clickwheel. Bluetooth, WiFi, and haptic feedback!!

sPot: Spotify in a 4th-gen iPod (2004)

Hackaday Prize 2020

Freedom of communication without borders, operators, networks, fees ! Your own network, your own rules ! Long range radio communicators

ARMAWATCH & ARMACHAT - long range radio messengers

Experience freedom of communication without borders, operators, networks, fees !!! Create your own network, your own rules !!!

ARMACHAT - Doomsday wireless QWERTY communicator

Hackaday Prize 2020

Pocket sized ESP32 display board with 180µW Always On Display and Gyro Controls

Low Power ESP32 Handheld

An open-source, affordable, dynamic quadruped robot

mjbots quad

A FeatherWing with a LCD, BB Q10 keyboard and a 5-way button.

Keyboard FeatherWing

Hackaday Prize 2019

A tool invented to make use of a extremely durable, cheap and ubiquitous material that allows to make things simply, from PVC pipes.

The Pipeline Project

Christophe Machet

Or how I try to create an exact mechanical (and functioning) replica of the Apollo Guidance Computer DSKY

Accurate Apollo DSKY Replica

Hackaday Prize 2020

This high tech water gun will track persons with the lidar sensor and fire several shots of water

Sentry water gun (lidar tracking!)

Hackaday Prize 2020

A GPS controlled Spotlight Drone

Lumos - Spotlight Drone

Like a HP-200LX but better - because 6502

ESP65 Pocket Computer: KIM-I/Apple-1/esp32

on rpi GPIO is enough signals to direct button matrix + 2" IPS 320x240 display.

#Zepir Raspberry Pi Zero mini computer

A rectenna is used make LEDs blink.

Rectenna Powered Blinkin' LED

Hackaday Prize 2019

Open-source long-range camera remote control with intervalometer and PC interface

Silver

Hackaday Prize 2020

This small vacuum chamber made of 3D printed parts helps to pull the air bubbles out of epoxy molded parts.

DIY Vakuum chamber

FIDO2 Arduino Authenticator

URU Card

Andrey Ovcharov

Handheld Retropie gaming console based on CM3+ and DPI screen

Retro-PixelBoy

Pep3175 Pep3175

2021 Hackaday Prize

A small Handheld PC with a physical 56 key keyboard, 4inch Display and Expansion header for add-on boards (Like Arduino Shield).

mutantC V4 - Easy to Build, Modular Handheld PC

View all

Bits

Jasper Sikken wrote 11/07/2018 at 19:35

Hi Matthew, thank you for following project my https://hackaday.io/project/159139-tiny-solar-energy-module-tsem. Did you know I am selling two derivatives? https://www.tindie.com/products/jaspersikken/solar-harvesting-into-li-ion-battery/ and https://www.tindie.com/products/jaspersikken/solar-harvesting-into-supercapacitors/

Are you sure? yes | no

Kris Winer wrote 11/07/2018 at 16:55

Thanks for following my Compact, $25 spectrometer project!

Are you sure? yes | no

Vittorio Loschiavo wrote 07/04/2018 at 05:09

Thanks for like to my project https://hackaday.io/project/87345-mini-vertical-wind-generator-3d-printed

Are you sure? yes | no