Close
0%
0%

Ojas Maywade

.

Following
Similar accounts worth following
1 Followers
34 Following
0 Projects
0 Likes
ojas-maywade

This user joined on 09/30/2020.

144.2k
2.9k
81
604
Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.
Project Owner Contributor

DIY hobby servos quadruped robot

miguel-ayuso-parrillaMiguel Ayuso Parrilla

18.6k
3.8k
3
60
This hybrid generator for drones is designed to get 10 times the flight time of a classic electric drone
Project Owner Contributor

HYBRID GENERATOR FOR DRONES

imIM

13.6k
4.1k
0
70
printed - using only PETg, no flex filament needed integrated NEMA17 stepper motor only three small parts for tolerance compensation
Project Owner Contributor

3D Printed Strain Wave Gear

johannes-hasslerJohannes Hassler

7.6k
4.4k
10
57
Using a terminal from 1976 as home automation hub. Because we can.
Project Owner Contributor

ADM-3A Dumb Terminal Home Automation Hub

daniel-karpantschofDaniel Karpantschof

6k
2.5k
0
3
Raspberry Pi 3B based robot, distance sensors, and ROS.
Project Owner Contributor

Wall Following and Obstacle Avoidance

sinclair-gurnySinclair Gurny

5.2k
5.1k
1
21
A hardware and software balancing cart pole.
Project Owner Contributor

ZIPY : ZIPY Inverted Pendulum Yakshave

philip-zuckerPhilip Zucker

4.8k
2.1k
1
6
Use your Raspberry Pi to "convert" your WiFi connection to wired. Use your old router as access point with Ad-Blocking.
Project Owner Contributor

Raspberry Pi route WiFi through Ethernet

dimitris-matsoukasDimitris Matsoukas

4.6k
876
1
4
Make a Raspberry Pi replacement using a Cypress Semiconductor Programmable System on a Chip (PSOC 5)
Project Owner Contributor

Not Quite Useless Raspberry Pi Replacement

land-boardscomland-boards.com

3.6k
2.3k
0
9
Rock solid mount that allows the bed to expand when heated.
Project Owner Contributor

Kinematic Mount for 3D Printer Bed

mark-rehorstMark Rehorst

2.9k
2.9k
8
28
An OpenSCAD library for parametrically generating ABLOY PROTEC keys suitable for 3D printing
Project Owner Contributor

Protec 3D Printing

tiernanTiernan

2.5k
1.9k
1
21
96x96 pixels, 8 buttons, a speaker, and 1K operations.
Project Owner Contributor

1K-OP

owen-truebloodOwen Trueblood

2.4k
2k
1
18
A MicroPython gaming system featuring a Wemos D1 mini, OLED display, joystick, buttons, fancy LEDs and a buzzer.
Project Owner Contributor

GamerGorl

brian-wagnerBrian Wagner

2.4k
2.3k
1
13
Redundant IMU
Project Owner Contributor

Super IMU

laetitia-belLaetitia BEL

2.2k
2.2k
0
3
COMPLETE PROJECT WITH A CHIP ELECTRONIC PARTS ARDUINO COIN ACEPTOR (USED FROM OLD MACHINE) POWER SUPPLY 6 RESISTORS RELAY 12 V
Project Owner Contributor

ARDUINO SINGLE CIGARETTE VENDING MACHINE

kukurikuuskukurikuus

1.9k
1.8k
1
5
This smart relay can sense the room temperature and sunlight to turn on and off the fan and light bulb. You can monitor the same from mobile
Project Owner Contributor

IoT Based Home Automation With Blynk and NodeMCU

subhajitSubhajit

1.1k
1.1k
0
5
For "Repairs You Can Print Contest", and for the sake of documenting the repairs and improvements, done by 3D printing.
Project Owner Contributor

3D Printed Repairs

christian-lercheChristian Lerche

1k
1k
0
6
din rail enclosure to mount the RPI4 on a cabinet
Project Owner Contributor

Raspberry Pi 4B din rail enclosure

hwhardsofthwhardsoft

292
292
1
6
The project was made as part of the MECHATRONICS course conducted at the AGH University of Science and Technology in Krakow
Project Owner Contributor

Bipedal robot

projektlego2020projektlego2020

View all

Share this profile

Share

Bits

Send a private message to Ojas Maywade

Become cool instantly

Create your Hackaday.io profile like Ojas Maywade and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Ojas Maywade", please tell us the reason.