0%

0%

megaCell

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 01/05/2018.

My Projects

The 2018 Hackaday Prize

why stick to CR2032 when you can have a CR200320!! Powering your Anet A8 3D printer with a coincell

MegaCoinCell

The 2018 Hackaday Prize

mechatronics and mate/terere engineering for Paraguay or anywhere else

IoTerere

Vapor Phase Soldering / Condensation Soldering

Was Is Phase Dohanne?

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

Multi-year always-on LED replacements for gaseous tritium light sources

TritiLED

ted-yapo Ted Yapo

The 2015 Hackaday Prize

DIY System on Chip based on FPGA, priced below 5 USD

DIPSY

antti-lukats Antti Lukats

Starting a car with a CR2477 coin cell

Coin Cell Jump Starter

ted-yapo Ted Yapo

The 2016 Hackaday Prize

A smart sensor Node to trigger an action on a smartphone each time a physical change is detected (temperature, displacement, click...)

Triggy - Sensor Node for Life Automation

Extract best practices from existing garage door projects. Build version that suites my needs; eventually integrate into other HA efforts.

Home Automation - Garage Door Opener

The 2016 Hackaday Prize

Autonomous intelligent IOT nodes connected to the home network, controlled via simple IFTTT style rules, configured via web interface

WiFi Based Distributed IOT Home Automation

A light-weight, cheap, and portable PC for penetration-testers and ethical hackers.

Portable Pen-Testing Hack Box

Try to decode the CAN Bus inside the car and perhaps use it for automation and control

Smart ForTwo CAN Bus Reverse Engineering

Daniel Velazquez

Portable device that emits XRays when the trigger is pulled. No battery necessary. Can be used to safely test radiation detectors.

XRay emitter device made from a barbecue lighter

If you have a lot of time, you can decide your position on Earth just using watches and eyes. Or RTC and LDR.

Light level geolocator

jaromirsukuba jaromir.sukuba

An Arduino based robot that avoids light by navigating using a neural network. Project for Make.

Arduino Neural Network Robot

sean-hodgins Sean Hodgins

An attempt to build a digital version of John Alexander's cheap STM design!

Scanning Tunnelling Microscope

A tiny vapor phase reflow oven

vapsy

This is a IP PBX Phone Server

Raspberry Pi + Elastix

kaltini kaltini

Goal: Create a syringe pump to feed material to the Moineau Extruder or the Oogoo Mixer.

Syringe Pump

Autonomous shutdown with Flip-Flop RS for 3D printer.

3D Shutdown

This is my first try in making Toys. I am building a baby mobiles with LED's which are controlled by an Arduino and an old Apple Remote.

Arduino Controlled LED Baby Mobile

mario-lukas Mario Lukas

View all

Bits