0%

0%

Mehrdad Majzoobi

Ubo offers a developer friendly, privacy-focused, open source development platform for self-hosting applications on Raspberry Pi. Let's begin hacking

Oakland, CA

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 04/01/2023.

My Projects

Supplyframe DesignLab: 2023 Hackada…

A platform to explore and learn more about hardware and software development topics by doing

Ubo project: building for builders

Mehrdad Majzoobi

Projects I Like & Follow

Released in late 2007 NAND Flash capacity was still very limited (4GB and 8GB MLC). But is it possible to replace the aging NAND Flash?

iPod Nano 3rd Gen MLC NAND Upgrade & Software Hack

Small UPS with fix 3V3/1A output and adjustable 1.3 to 12V output, Li-Ion charger and protection

IoT UPS

Ultimate Presence-Based Room Automation

RoomSense IQ

My 4 axis motion control rig

Motion Control Rig - 0.1.0

Convert Kicad PCB files into GCode with isolated PCB Nets

PCB Isolation Routing Software

Michael Schembri

How to generate frequencies below 10Hz using a PC, an amplifier, and a handful of components.

Extreme Low Frequency Signal Generator

Universal DSP radio, now with new firmware and SI4732 Chip

DIY Si4732 LW,MW,SW,SSB Radio with 2.8 inch touch

mircemk mircemk

Look mom, no MCU!

All-hardware frequency meter and LCR

Raspberry Pi Pico misses out on an EEPROM, so why not add it by ourselves, that too EEPROMs are dirt cheap.

How to Add an EEPROM to Raspberry Pi Pico

Collate weight, color, and emitted ionizing radiation of foods to train a NN. Then, run it on Beetle C3 to detect food irradiation doses.

IoT AI-driven Food Irradiation Dose Detector

The Sonos Remote Station describes my first steps in freeform electronics.

Sonos Remote Station

With on-board matching network.

1.420 GHz Antenna

Robert Rouquette

Make IoT-based Smart Home Automation using Multiple ESP32 NodeMCU ESP8266 networks to control all the home appliances with Blynk & Switches.

IoT Project Using ESP32 NodeMCU Network With Blynk

Supplyframe DesignLab: 2023 Hackada…

Solar powered RP2040 based circuit for transmitting 20 meter and VHF telemetry while circumnavigating the globe at ~50,000'

High Altitude Balloon Tracker WSPR APRS

High Altitude Ballooning!

This is a 4-port RF switch for selecting different antennas or transceivers.

Ham Radio Antenna Switch

A WiFi + BLE handheld terminal with color display and touch screen that could be your best IoT project mate

DIY IoT Terminal

SimonXi SimonXi

The Arduino IDE can program the ESP8266 directly, however it is frequently more difficult, whereas the ESP32 is simple to program.

ESP32 VS ESP8266: What Is The Difference?

ericksonbrecken1998

Replace the obsolete micro controller board with a new one containing an Atmega328PB, bringing new life to this product!

Jumbo Remote Upgrade

View all

Bits