0%

0%

Metanoic

Software Engineer by trade; interests in physics, optics, electronics.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 11/05/2017.

My Projects

The goal of this project is to catalog the design and optimization of a piezoelectric printhead, and to detail the decisions therein.

Single Nozzle Piezo Inkjet Printhead

Create rotary codewheels from optical media (CD-R's) by burning visual patterns with your standard burner drive.

Discoder

Projects I Like & Follow

The 2018 Hackaday Prize

A powder and inkjet 3D printer based on HP45 inkjet technology

Oasis 3DP

The 2018 Hackaday Prize

A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.

3D Printed Robot Actuator

A piezo inkjet printer built from scratch

DIY Inkjet Printer

Dominik Meffert

The 2017 Hackaday Prize

DIY Optical Power Meter with SFP (Small Form-factor Pluggable transceiver) and DDM (Digital diagnostics monitoring ) protocol

Optical Power Meter (with SFP and DDM protocol)

oakkar7 oakkar7

Open-source wire bending CNC machine for wires at 1mm and less in diameter.

Precise Wire Bending Machine

You read that right.

Open Source Freakin' Scanning Electron Microscope

DIY Semiconductor fabrication using maskless lithography

MakerFoundry

$polyfractal$ polyfractal

open hardware 2 GHz to 13 GHz two-port vector network analyzer

Vector Network Analyzer

A high torque, high precision, Strain Wave Gear (harmonic drive) based 3D printable closed loop servo actuator for use in robotic arms

Open HD

This will emulate the AVR code right out of the .ELF file

Arduino ATmega 328 Emulator

A workshop on IOT including a simple IOT device using Wemos D1, a DS18B20 temperature sensor, a battery shield and a rechargeable battery.

Simple IOT

1 kB roguelike using an Arduino and 0.96" OLED

1 kB Arduino Roguelike

Using OpenCV and 6 x Raspberry Pi to detect if rooms are occupied and them turn on and transfuse media to the relevant OpenElec frontend.

Media Center automation

OK, most drill-presses have "force-feedback" in the normal sense... so this is a bit ridiculous.

drillPresseur - Drill-Press with Force-Feedback

Cheap surveillance cameras often have a poor quality. If you have a small budget you should look at this project.

Surveillance camera out of a notebook cam

You can see step by step the evolution of our drone. This is the part 1. We will publish the part 2 very soon. Search us on Kickstarter.

Evolution of our Droiko

Cactus Robotics

This is a repetition, as an undergrad project, of the work described in Appl Spectrosc May 1, 1992 46: 778-781.

Fast Scanning Hadamard Spectrophotometer

vazquez vazquez

Increase RepRap capabilities beyond fused filament fabrication to produce different parts like circuit boards, plastic parts, and ceramics.

Multimaterial Additive and Aubtractive RepRap

View all

Bits