0%

0%

ubergeekseven

Geek

Cincinnati, Ohio

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 08/05/2014.

My Lists

For Sure Need to Make

I must build this thing. This is a reminder to me.

Curated by ubergeekseven

Projects I Like & Follow

The 2016 Hackaday Prize

(Mr.Robot's) fsociety inspired Mechanical keyboard. Wirelessly sense, assist and automate your good and bad computing activity.

The fsociety Keyboard

Pamungkas Sumasta

Thor robot based on the author AngelLM

'Thor' robot with addons and GUI

dannyvandenheuvel

The 2016 Hackaday Prize

Make a board to interface the Raspberry Pi with a surplus Kindle screen. The smaller and cheaper, the better

6 inch Pi E-ink display

Capture the display of a Rigol DS1000Z series oscilloscope by LAN only, using LXI SCPI commands. No USB, no VISA, no IVI and no Rigol drivers required

Driverless Rigol DS1054Z screen capture over LAN

The 2018 Hackaday Prize

high-end open-source printer with a water-cooled tool changer.

Blackbox - Tool Changing 3D Printer

The 2015 Hackaday Prize

An easy to build embroidery machine, with open source design and software.

Open Source Embroidery Machine

jupdyke jupdyke

The 2017 Hackaday Prize

Micro Smart LiDAR Sensor

MappyDot

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

Hackaday Prize 2019

Blackbox shifts 3D printing towards a multitool manufacturing robot.

Multitool 3D Printer - Blackbox

PlatformIO is an open source ecosystem for IoT development (Cross-platform IDE and unified debugger. Remote testing and firmware updates)

PlatformIO

The 2015 Hackaday Prize

Cooling the core body temperature of people diagnosed with MS.

Bringing Cool Relief to Multiple Sclerosis

Hackaday Prize 2019

Making an electron gun is a first stage of my future plans - to make DIY electron microscope/EBM metal 3D printer.

Metal 3D printer

Utilizing the Raspberry Pi to be a video intercom using a USB webcam and IO board

Raspberry Pi Win10 IoT Intercom

The 2016 Hackaday Prize

Cheap and easy to replicate internet connected PM2.5/PM10 monitor allowing you to check air quality inside and around your house.

Cheap and simple air quality monitor

The 2017 Hackaday Prize

An open-source robot that helps makers build low-cost robots without having to start from scratch.

Two Leg Robot

Taking a thrift shop printer and a cheap Continuous Ink Supply System kit to make a economical inkjet printer for hackerspace use.

Cheap inkjet printing for hackerspace

cprossu cprossu

Imagine putting together home automation projects with easy to use DIY open source modules that save energy and make life awesome.

DIY Home Automation

Hackaday Prize 2019

This is an Arduino based controller inspired by Microsoft’s surface dial.

An Arduino Dial Controller. (Ahmsville Dial)

View all

Bits