0%

0%

Michael Lee

Electronics and computer hobbyist.

Vancouver, Canada.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 06/08/2021.

Projects I Like & Follow

A HAT to easily interface a Raspberry Pi with a KNX bus.

KNX Raspberry Pi HAT

tijl-schepens Tijl Schepens

Hackaday Prize 2019

I read opensurgery.net, and have a doubt. can we make some kind of surgery robot with maker utilities?

An Arduino Arm for ROS, wait a medical usage.

qq95538 qq95538

A 3D printed drone with an added pusher motor

3D Printable VTOL EDF Jet

harry-gao Harry Gao

Convert Kicad PCB files into GCode with isolated PCB Nets

PCB Isolation Routing Software

michael-schembri Michael Schembri

An OpenSCAD library for parametrically generating ABLOY PROTEC keys suitable for 3D printing

Protec 3D Printing

tiernan Tiernan

A USB HID gamepad integrated into a phone case.

Cuttlephone: Gamepad Phone Case

2x3/2x5 IDC 2.54mm, 2x3 Pogo pin 1.27/2.54mm

AVR-ISP Pogo Pin Adapters

In-Circuit Oscillator Calibrator for AVR Microcontrollers based on ATtiny84

TinyICOC

stefan-wagner Stefan Wagner

Legible notes that don't cost a fortune

LCD music display

lion-mclionhead lion mclionhead

The main goal of this project is to design a Voice-Controlled Home Automation System without replacing the existing Switchboard.

IoT at just 7$ in your existing switchboard

Developing a cheap DIY alternative to expensive machined ballscrew actuators (with a little less precision). For humanoid robots.

3D Printed Ballscrew Linear Actuator

A multi-track, multi-layer Audio Looper for use in a iive Guitar performance setting running on an rPi in bare metal with a 3D printed case.

rPi Bare Metal Audio Looper

patrick Patrick

Enjoying TV with a smart Hi-Fi or speaker? Use your TV IR remote to control volume, instead of having the other one always around.

SpeakerIR

enrico-gueli Enrico Gueli

Go beyond the Arduino with this customizable Uno template. Take your prototypes to the next level!

Exporer Uno PCB Software Template

This Tesla Coil has been modified so that the spark "sings" melody generated by a sound source.

DIY Arduino Audio modulated (misical) Tesla Coil

mircemk mircemk

Ultra Mobile PC - using Raspberry Pi, Nec MobilePro and 3d print

Raspberry Pi - UMPC

Make IoT-based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the IR Remote, manual switch & Wi-Fi.

Home Automation using Blynk IR Remote & ESP32

Very low component count sensor based on disc piezo element / microcontroller combination.

Strain / mechanical distortion SENSOR + sourcecode

View all

Bits