0%

0%

Mark

I am a german M.Eng. Actually i work for a company from switzerland. There i program robots & design (electrical& mech) rob cell

Germany

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/05/2015.

My Projects

Hackaday Prize 2020

No lawnmower on the market meets my requirements. So I build my own lawn mover

High flexible Monster Lawn Mower JLX OverDrive

Interfacing a 3Dconnexion Spacenavigator to Linux and mbed to control a small Robot arm built with Lego technic

Robot Arm | Interfacing 3Dconnexion Spacenavigator

This project shows how to use the standard Nucleo Board programmer to reprogram the Storm32 Gimbal Controller

Nucleo SWD + MBED to reprogram StorM32 Controller

My soldering stand often has its own life because there is no fixed stand. So i bring it together with a flexible sucker based handy holder

cheap fixed and flexible soldering iron holder

Short How TO connect Mini USB Host Shield to the ESP 32 Controller

Mini USB Host Shield and ESP32

Transfom OBall & LEGO to cheap robot tire

Transfom OBall & LEGO to cheap robot tire

Projects I Like & Follow

An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.

Atlas - 6DOF 3D printed universal robot

Damian Lickindorf

The 2015 Hackaday Prize

ProtoVoltaics Pick and Place Machine Project

Pick and Place Machine

The 2015 Hackaday Prize

This is a micro-quadcopter I'm building from scratch using an Arduino Pro Mini, MPU6050, Nrf24L01+ modules and coreless motors.

Quadcopter from scratch

The 2015 Hackaday Prize

Creating a generic underwater data logging platform that is easy to build & modify for many different environmental monitoring projects.

The Cave Pearl Project

ESP-32 WROOM-32D has Three phase Centre Aligned MC-PWM, Dual SPI, I2C, 2MHz ADC, UART and CAN. Enough for a controller.

ESP-32 BLDC Robot Actuator Controller

The 2015 Hackaday Prize

A low cost, full featured open source, industrial camera

Open Source Industrial Smart Camera

Faze4 is 3d printable 6 axis robotic arm . It uses stepper motors and 3d printed cycloidal reducers.

Faze4 Robotic arm

The 2015 Hackaday Prize

Gas sensor "grenade" that may save lives instead of taking them. The sensor can be thrown into dangerous areas to remotely report levels

Gas Sensor For Emergency Workers

Hackaday Prize 2019

a machine to create canvas paintings of your favorite digital images

If ( ) Then {Paint}

True Open Source Time-Of-Flight Lidar

OpenTOFLidar

iliasam iliasam

A 3D printed robotic leg, inspired by Boston Dynamic's Spot Mini robot. Aimed to balance form and function

3D Printed Quadruped Leg

The 2016 Hackaday Prize

This is my robot arm, with recycled materials, can pick 2 Kg and costs around 100$

D.I.M.E.R PROJECT 6 DOF Robot Arm

Antonio Regueira

The 2015 Hackaday Prize

Develop robust and affordable advanced sensing capability for 20,000 weather stations in Africa (lightning, precip water, ...)

Team TAHMO

Nick van de Giesen

ROS based two-wheel differential drive robotic platform.

Linorobot

Juan Miguel Jimeno

The 2015 Hackaday Prize

A community pollution monitoring system aggregating pollution data from individual station users to get information on the environment.

PASS: Pollution Analytics Shared Socially

The 2015 Hackaday Prize

Utilise off the shelf hardware and OSS to create a cheap thermal imaging camera for firefighting use

ElectricEye

Emotive Support Robots

HaRoCo @ The DesignLab

Electric Bobby Car, or E-Bobby Car, all-wheel upgrade using parts from two Hoverboards

All-Wheel Electric Bobby Car

View all

Bits

ProtoVoltaics wrote 07/09/2015 at 23:37

Thanks for liking out Pick and Place project!

Are you sure? yes | no