0%

0%

MubashirAhmad12

I am doing electrical engineering from UET ksk, and i am fond of reading novels and playing cricket. I wish i can help poor .

Lahore

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 09/19/2019.

Projects I Contribute To

The 2016 Hackaday Prize

Dual input 24 bit Multimeter with USB interface, single channel 10 bit USB oscilloscope, PWM out, 2 Ch Data-logger, R, C, Digital sniffer.

Multimeter +

Projects I Like & Follow

Pi 3 in a metal box? No problem!

Raspberry Pi 3 External Antenna

The 2017 Hackaday Prize

FREE and Open Source, Arduino Due based Telescope Control GOTO

rDUINOScope Boiana

dessislav-gouzgounov Dessislav Gouzgounov

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

julian-fernandez Julian Fernandez

The 2016 Hackaday Prize

tracking CubeSats faster, anywhere and anytime for everybody!

The Distributed Ground Station Network

The 2016 Hackaday Prize

Autonomous intelligent IOT nodes connected to the home network, controlled via simple IFTTT style rules, configured via web interface

WiFi Based Distributed IOT Home Automation

Expansion boards are designed to be easy to use in DIY IoT projects, low cost, reliable, saves the pain of cabling bread boards

STM32 Blue pill IoT expansion boards

Is there room for another oscilloscope? Real Time nodejs/html5 Sci ToolBox! Arduino | Raspberry Pi | FPGA

GinScope | Science ToolBox | Oscilloscope

gintaras-valatka Gintaras Valatka

I use the Ada language on a STM32F4 to turn an old hard drive into a solenoid engine.

Software controlled solenoid engine

Fabien-Chouteau

The 2018 Hackaday Prize

This project will give you full gesture control of any virtual Hero you like with a simple set of inexpensive devices using sensors on RPi

Immersive VR on Rpi to control a Hero with sensors

jeanperardel jean.perardel

The 2017 Hackaday Prize

We have 4 Resistors, 4 Capacitors and 1 FPGA to make RADIO Receiver.

4R4C - FPGA Radio Challenge

antti-lukats Antti Lukats

The 2016 Hackaday Prize

All in one open source device to monitor and data log power usage of USB devices and other connection types.

USB Multimeter

Break-out & interface board for the Dorji DRA818 amateur radio transceiver modules

NoVAHammy

bob-coggeshall Bob Coggeshall

The 2017 Hackaday Prize

Z-Wave development board Z-Uno + Touch pad detector chip TTP223 + Livolo glass + Batteries CR2032

Create Z-Wave capacitive touch switch on batteries

vitaliy-yurkin Vitaliy Yurkin

Hackaday Prize 2019

When a magician rotates his magical wand and says 'Abracadabra', magic happens! This IoT Magical Wand project is inspired by this.

IoT Magical Wand

dixon-selvan Dixon Selvan

The 2018 Hackaday Prize

An open source modular system for learning, development and games.

DevBoy

nicolai-shlapunov Nicolai Shlapunov

Solar panel optimizer ANN (Simple Predictor + Adaptative Predictor + feedForward (Panel positioner) +NARX ).

Artificial Neural Network

david-steckler David Steckler

IRIS2 is a followup of IRIS project. It's a complete project of Raspberry Pi based Internet Radio with own 2+1 AMP HAT and spectrum analyzer

IRIS2 Internet Radio

Step-by-step instructions on running Remote Desktop on Raspberry Pi with tips and tricks

3 Ways to Run a Remote Desktop on Raspberry Pi

View all

Bits