Close
0%
0%

Todd

Following
Send a private message
Similar accounts worth following
1 Followers
26 Following
0 Projects
0 Likes
todd
Send a private message

This user joined on 03/21/2017.

240k
683
242
568
Raspberry Pi Zero 3D Printed Video Streaming Robot
Project Owner Contributor

ZeroBot - Raspberry Pi Zero FPV Robot

maxkMax.K

160.3k
787
62
502
Cartesian PNP machine using Rails/Carriages for high speed and accurate part placement. Affordable open source pick and place is on the way.
Project Owner Contributor

DIY Pick and Place

anthonywebbanthony.webb

58.3k
321
109
278
Multi-year always-on LED replacements for gaseous tritium light sources
Project Owner Contributor

TritiLED

ted-yapoTed Yapo

48.4k
3.8k
4
97
The LittleArm is a 3D printed Arduino robot arm created for Makers and STEM education
Project Owner Contributor

LittleArm: 3D Printed Arduino Robot Arm

slantconceptsslantconcepts

43k
366
8
67
Building a 6-axis robot based on the Thor robot. When size DOES matter!
Project Owner Contributor

Building the Thor robot

olaf-baeyensOlaf Baeyens

17k
102
4
84
An open source robot to inspect under vehicles, crawl spaces and any other dark dirty space you need to take a look at.
Project Owner Contributor

InspectorBot

dennisDennis

15.9k
2.6k
4
22
I programmed Tetris for the Arduino. It was a 2-Day Project. So it is not that big. But funny. The LCD Display is not made for this :-)
Project Owner Contributor

Tetris on Arduino + LCD

numericnumeric

11k
100
8
87
I am thinking for a while about how to teach young generation coding in a funny way.
Project Owner Contributor

Learn to code with this fidget spinner

nuri-erginerNuri Erginer

10k
119
12
118
This is the obvious next step to the Fidget Spinner, and the last project involving one. I promise.
Project Owner Contributor

POV Fidget Spinner

sean-hodginsSean Hodgins

7.5k
50
8
44
A little rover robot to keep an eye on my prints inspired by the butter passing robot in Rick and Morty.
Project Owner Contributor

Butter Robot

brambram

3.3k
39
7
40
A DIY solder fume extractor for 80mm psu fans. Has built in charger to run off 18650 batteries.
Project Owner Contributor

Solder Sniffer 9000

jon-thomassonJon Thomasson

2.1k
33
0
26
Lighty is a 4DOF mobile robot whose aim is to empower pico projectors. Before Lighty, setting up a movie was really difficult.
Project Owner Contributor

Lighty - world's first robotic pico projector

ovidiu-sandruOvidiu Sandru

1.8k
621
0
8
A very low cost robot using an A+/Zero, 28BYJ-48 Steppers, ULN2003 Drivers and ultrasonic distance sensor
Project Owner Contributor

LJBot 0.5 A 3D Printed Raspberry Pi Robot

jacksonliamjacksonliam

1.8k
1.8k
1
5
IoT System to control 433 MHz RC power sockets, PIR sensors, Door Sensors and much more.
Project Owner Contributor

iot-433mhz

rocco-musolinoRocco Musolino

1.8k
26
0
17
Device to control a bathroom fan offering two modes of operation: level of humidity or timed mode
Project Owner Contributor

"Smart" bathroom fan controller

joo-assunoJoão Assunção

1.8k
17
1
16
I have 8000 bearings to install. I'm not doing it manually. That is not my style. A DIY Lasercut pneumatic press.
Project Owner Contributor

DIY Pneumatic Bearing Press

sean-hodginsSean Hodgins

1.5k
632
0
5
Experiments to turn a 'GameTrak' controller into an expressive midi controller for live shows.
Project Owner Contributor

Edt-2000: Expressive midi controller

edwin-meijneEdwin Meijne

708
708
0
5
A small, truly autonomous) quadruped walker powered by a raspberry pi
Project Owner Contributor

Raspberry Pi Quadraped

marsfanMarsfan

View all

Share this profile

Share

Bits

Dennis wrote 06/29/2017 at 00:55 • point

Thanks for following my project InspectorBot !

  Are you sure? yes | no

Send a private message to Todd

Become cool instantly

Create your Hackaday.io profile like Todd and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Todd", please tell us the reason.