0%

0%

Oleg Orlov

bla-bla-bla

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Github

This user joined on 11/25/2016.

Projects I Like & Follow

The 2015 Hackaday Prize

A printable robot arm, a little bigger than the usual hobby servo once.

3D Printable Robot Arm

andreas-hoelldorfer Andreas Hoelldorfer

Hackaday Prize 2020

Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.

DIY hobby servos quadruped robot

miguel-ayuso-parrilla Miguel Ayuso Parrilla

The 2018 Hackaday Prize

A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.

3D Printed Robot Actuator

paul-gould Paul Gould

Official Hackaday Prize Entry

Building a digital large format camera

Large Format Camera

jimmycalzen jimmy.c.alzen

The 2017 Hackaday Prize

Creating a four legged robot with a running bound gait.

Mr. Runner

alex-martin Alex Martin

Multichannel audio systems based on BeagleBone. Compatible to Linux and Bela's hard real-time environment. In Stock at Shop.Bela.io

CTAG FACE and BEAST Multichannel Audio Systems

henrik-langer Henrik Langer

2021 Hackaday Prize

Your 3D content on a real PoV volumetric display, no glasses needed!

VVD: an open source Real 3D Volumetric Display

madaeon Madaeon

Official Hackaday Prize Entry

super mario as a hologram? Princess Leia? No problem for voLumen! ................virtual media brought to reality................

voLumen - volumetric 3D display device

Full blown RTOS written in Thumb ARM assembly language to fit in 1024 bytes

M0S - CortexM0 RTOS in 1024 bytes

Putting two steppers on a single driver is dumb. Four doubly so. Here's a stepper driver breakout.

A4988 Stepper Driver Duplicator

Beginner friendly way to solder 0603 or larger components to pinheaders so you can plug them in your breadboard. 2 minutes and you are done.

Easy breadbording of 0603 SMD led / resistor

ftregan ftregan

This unusual 3D printer configuration is easy to build and the most inexpensive to operate with open-source hardware and no consumable

Unusual Bottom-Up 3D printer

nicolastranchant nicolas_tranchant

A set of wall mount, magnetic SMD storage container / cartridge for product development

SMD Organizer Cartridge (Magnetic Wall Mounted)

The 2016 Hackaday Prize

Hand Made 3d Printer

Print-Arm 3d: Hand Made 3d Printer

This recipe focuses on the necessary hardware and software to make a device to monitor the health of a plant or plants in a small area.

Open Source Hardware Plant Health Monitor

shane-kirkbride shane kirkbride

Spidey is an open-source robotics platform, including 3D parts, electronics, bill list and software

Spidey: an open-source DIY robotics platform

grgoire-passault Grégoire Passault

Decided at the last minute to build an egg plotter out of scrap and old printe, to be ready in time for Easter.

Egg bot

Heated bed for Delta 3D Printers with round plate.

Heated Bed for Mini Kossel 3D Printer

alpha-charlie Alpha Charlie

View all

Bits