danjovicdanjovic wrote 10/15/2016 at 07:52 • 1 min read • Like

I've been porting this the project #Shorty - short circuit finder form @jaromir.sukuba to the ATTiny45/85.

I have been working too on a single sided board for the project. The board takes 3.3" x 0.6" (roughly 84mm x 16mm).



danjovic wrote 10/17/2018 at 03:19 point

Hi @valterviktor , I  have just routed a PCB for Jaromir's project and ported the code, but since I have never assembled the board I never tested it, so no guarantee that if I send you an hex it will work, sorry.

  Are you sure? yes | no

meestermole wrote 09/21/2018 at 19:17 point

I would also like to build this. I have printed the board, and downloaded your schematics. I will program the Tiny85 with an Arduino. I really hope this works!

  Are you sure? yes | no

meestermoley wrote 10/02/2018 at 23:15 point

Sweet - Boards came in yesterday - expecting parts tomorrow

  Are you sure? yes | no

meestermole wrote 10/04/2018 at 15:32 point

I populated the board, however my problem is with programming the ATTint85 - in Arduino IDE i get many errors like 'UBRR0H' is not declared in this space. Any thoughts? Hopefully you're still active here. My coding skills are lacking

  Are you sure? yes | no

danjovic wrote 10/17/2018 at 02:45 point

Hi @meestermole  I have worked on the PCB then ported the code to C. I haven't touched the arduino code, it was inherited from the original project when It was forked.

I suggest you to  test the C code or use it as a basis to modify the arduino code.

  Are you sure? yes | no

valterviktor wrote 01/15/2018 at 10:12 point


I would like to build this circuit, can you send your attiny85 hex code?


  Are you sure? yes | no