0%

0%

Richard Lawler

Richard Lawler is a developer of mobile software including the popular PatternMusic music creation apps.

Sebastopol, CA

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/27/2018.

Things I've Built

Fume Coffin Laser Cutter Exhaust Filter System

https://www.instructables.com/id/Fume-Coffin-Laser-Cutter-Exhaust-Vent-Filter/ https://www.instructables.com/id/Fume-Coffin-Pre-Filter/

Projects I Like & Follow

Focused on making clear every building step with helpful links and tips for total noobs (like me) who wants to get started with drones

My first copter build with RPi2 and Emlid Navio2

dmitriy Dmitriy

The 2016 Hackaday Prize

Integrating open source autopilots from drones into massive pieces of farm equipment to do something useful.

Autonomous Tractor

matt-reimer Matt Reimer

A robot that moves vertically on the pipe.

Pipe Climbing Robot

Anastasiia Zelenska

The 2018 Hackaday Prize

Unique, compact power conditioning enables always-on sensor monitoring and Long-Range radio (LoRaWAN) link for IoT applications.

SoLoRa - Solar Powered always-on IoT sensor node

joe-miller Joe Miller

The 2016 Hackaday Prize

Trying some different ideas to combine Snap Circuits with Lego. In this first attempt, I built a mirror spinner.

An Experiment to Combine Lego and Snap Circuits

steve-schuler Steve Schuler

The 2016 Hackaday Prize

Last-mile RF packet encryption for mass produced IoT devices through Telehash

IoT security for the masses

kumar-abhishek Kumar, Abhishek

Allows encrypted communication between two RF serial bridge modems of up to 40km distance LOS

two way text/command communication using RFD 900X

The 2016 Hackaday Prize

Eye Moisture Retention and Rehabilitation Goggles: Cost effective assistive device for prevention and treatment of dry eye syndrome.

Humidifeyes

spandanacheruvu spandana.cheruvu

3D printed linear servo's used to drive a small Delta robot

Linear Delta Robot 3D printed

Low cost, raspberry pi based, KNX server

RaspiKNXServer

konstantinos.roussis

The 2017 Hackaday Prize

Easily synchronize devices using AutoIt and remote control or IM software

Super-easy IoT with AutoIt

matheus-carvalho Matheus Carvalho

Small device to show upcoming buses in realtime at a given stop. It runs on an ESP8266, get the data from NextBus and it's web configurable.

Bus Schedule Display

Automated, smart trash can to separate recyclables from landfill waste

TrashBot

Raspberry Pi direct conversion receiver JSON receiver

Raspberry Pi IoT DC RX

marcus-berg Marcus Berg

Music on a DC Motor, tone generation through Motor RPM

Musical DC-Motor

The 2018 Hackaday Prize

Robots get their groove on with the help of an Infrared Beat Blaster.

Robot Dance Party

jay-francis Jay Francis

The 2016 Hackaday Prize

One video game, three challenges: popularizing, teaching, and doing research through citizen science on synthetic biology.

Hero.Coli

raphael-goujet Raphael Goujet

The goal of the peojet is to find optimal antenna regarding range, sensitivity, LOS and Gain ...

IoT antennas (sensors & Getways)

View all

Bits