0%

0%

Philippe

Up in the air

Montreal

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/27/2014.

Projects I Contribute To

lol travelling salesman problem

Travelling Hacker Box

Projects I Like & Follow

Hackaday Prize 2019

Homemade 8MHz Z80 SBC, 128kB banked RAM, RTC, SD (HD emulation), Basic and Forth interpreters, CP/M 2.2 and 3, cross Assembler and C (SDCC)

Z80-MBC2: a 4 ICs homebrew Z80 computer

An open hardware reading device

The Open Book Feather

If you need a refresher for digital logic before tackling FPGAs, this is the bootcamp for you!

FPGA Bootcamp #0

The 2018 Hackaday Prize

... is designed for direct drive wheels for swarm robots

PCB stepper motor

Hackaday Prize 2019

I've been in a clock making sort of mood recently and I've seen tons of word clocks so I thought it was time to give it a try

Small Word Clock

sjm4306 sjm4306

good looking and clever 4-legged robot

Dizzy Wolf

The 2018 Hackaday Prize

A handheld FPGA based NES which utilizes the Spartan 6 FPGA by Xilinx.

Spartan Mini FPGA handheld NES

An easy to build homemade single board computer with a V20HL aka uPD70108H (8088 + 8080) or 80C88 CPU. CP/M-80 and CP/M-86 supported.

V20-MBC: a V20 (8088 + 8080) CPU homebrew computer

A VT100-like terminal for the Z80-MBC2

uTerm

An ST-Link clone has a powerful MCU, nice enclosure and useful connectors to repurpose it for quite some projects.

ST-Link clone repurposing

Hackaday Prize 2019

An ATSAMD21 (same as Arduino Zero) handles parallax scrolling, 16-bpp graphics at 40-fps on a 160x128 TFT LCD

40-fps 16-bpp platform game on a Cortex M0+ board

Nicola Wrachien

Experimental thumb keyboard, suitable for a hand held device

Thumb Keyboard

Hackaday Prize 2019

Table clock with e-paper display

Agora clock

The 2018 Hackaday Prize

Software and Hardware to make Word Clocks easier to make

Confagrid

A powerful Z80 computer built around a highly expandable central bus design

ZTO-80 Computer System

A poket-to-laptop size microcomputer/programmable calculator, based on Arduino DUE and Terminal-BASIC

Terminal-BASIC programmable calculator

Andrey Skvortsov

Yet another homebrew computer based on 65C02 CPU

DB6502

Powerful 3D printed Vacuum Cleaner. Almost everything is printed except motor, electronics and some screws. Motor & Electronics cost ~ 10$

3D printable Vacuum Cleaner

View all

Bits

GrayPillow wrote 05/09/2017 at 14:20

Thanks for following AnanasStepper 2.0!

Are you sure? yes | no

Sébastien Mischler (aka skarab) wrote 07/25/2016 at 04:23

Thanks for following the uTopiaPrinter project. Peace.

Are you sure? yes | no

esot.eric wrote 07/23/2016 at 20:39

Howdy, yo! Thanks for the follow!

Are you sure? yes | no