0%

0%

Peter Walker

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 02/15/2018.

Projects I Like & Follow

A tiny homemade radio telescope I built which can take pictures IN RADIO... i guess i was just bored

Tiny Radio Telescope

gonalo-nespral Gonçalo Nespral

A quadruped robot using cheap servos closed-loop control and force-sensing resistors for ground force feedback. Uses Teensy and PCT.

Quadruped Robot

The 2017 Hackaday Prize

Emergency Button for 7$ based on ESP8266 Wifi board

Emergency button : Reliable, Inexpensive & Design

jeanperardel jean.perardel

Using an ESP32 and 'CNC' Stepper motors to power a LEGO Technic track vehicle.

'CNC' Stepper Motor powered LEGO Technic Tank

Using the sensors and controller of a drone , I created a rover to use the drone stability features on the ground.

PlutoX Rover

siddharthc siddharth.c

Supplyframe DesignLab: 2023 Hackada…

It is an Open Source –DIY- project. It can maintain its own balance and can be controlled remotely via Bluetooth connection.

LOTP Two-Wheeled Self-Balancing Robot

limenitis-reducta Limenitis Reducta

3D printed skin for polyurethane resin cast

NESTO Prototyping

michal-memeteau Michaël Memeteau

It’s been almost 4 years since I started playing with self balancing robots and after 3 other versions, here it is, finally one that works..

Uncon Talk: Self Balancing Robot - finally...

A quadruped with custom 3D printed legs and locomotion software written in Python on a Raspberry Pi

Quin the Quadruped

PIDDYBOT is an DIY Open Source Balancing Robot aimed at teaching PID Control in a hands on way.

The PIDDYBOT

sean-hodgins Sean Hodgins

Step-by-step instructions on running Plex Media Server on Raspberry Pi or any other ARM

Plex Media Server on Raspberry Pi or anyother ARM

Using computer simulation to design a control system for balancing robot made of laser-cut acrylic.

Laser-cut Balancing Robot "LaserBot"

kirill-salita Kirill Salita

Used for my MULE GATE, but could control anything needed with Secure2.0 Protocol and MYQ enabled.

CHAMBERLAIN (LIFTMASTER) GARAGE REMOTE

dave-conditt Dave Conditt

Started as a collaboration with an Art student to 3D print a geodesic dome, using isosceles and equialteral triangles created using OpenSCAD

Geodesic Dome

mark-gaffney Mark Gaffney

A Construction set. Made of flat pieces. 3D-printer friendly.

K-raft

andrey-kalmatskiy Andrey Kalmatskiy

The 2017 Hackaday Prize

Cutsie Whun is MEGA BREAD series project #6. A tough, fast, and RC controlled 2 wheeled balancing fun machine. A lot of hard work pays off.

CUTSIE WHUN - Fast, Tough, N Cute Balancing robot

sf-pigeon-kicker-aka-james-ryan [SF] Pigeon Kicker -- AkA James Ryan

Parasitize a commercial clock with an ESP8266 to take over control of its buttons, LEDs and FM.

ESP Parasitized Clock

Using Visuino to import already built and coded custom Remotley controlled balancing Arduino robot. Having 6 RC receiver channels, Gyro

CUTSIE WHUN and Visuino - balancing 6 RC channels

sf-pigeon-kicker-aka-james-ryan [SF] Pigeon Kicker -- AkA James Ryan

View all

Bits