0%

0%

Phil

Electronics is both my hobby and my job

Australia

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Facebook

This user joined on 09/06/2025.

My Projects

Putting a non-functioning barebones keyboard back to work

Reverse engineering a old school keyboard

Fried from a previous attempt - now returning it to working order

LED Matrix display repair

Projects I Like & Follow

Official Hackaday Prize Entry

Integration of cheap wireless Arduino sensor nodes with an awesome home automation platform called OpenHAB. Explore interface options.

$20 Wireless Arduino Home Automation w/ OpenHAB

eric-tsai Eric Tsai

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

The 2018 Hackaday Prize

Make & 3D print your own phone with sensors, displays, electronics, batteries and antennas. Customize Android and do exactly your thing!

Kite : Open Hardware Android Smartphone

shree-kumar Shree Kumar

The 2015 Hackaday Prize

A full stack project dedicated to easily collecting, analyzing and sharing IoT sensor data.

analog.io - A full stack IoT platform

luke-beno Luke Beno

How to power up and communicate with the cheap RCWL-0516 radar sensor module

First steps with the RCWL 0516 radar switch

A near-Arduino Nano form factor and Arduino compatible board based around a "better" and cheaper AVR MCU (currently an ATtiny1616)

The Launchpad - A $2 Arduino Nano alternative

clyde-d-corpuz Clyde D. Corpuz

Hackaday Prize 2019

An Off-the-grid messaging system.

Skrypt

In this period of isolation, I'm trying to build an oximeter with parts already in house. An oximeter is made by two leds and a photodiode.

Oximeter do it yourself

giulio-pons Giulio Pons

A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp

Pick and place machine - Smoothieboard/OpenPnp

A Raspberry Pi based automated grow controller for medical marijuana.

Autoflower

greasy-nichols Greasy Nichols

The 2018 Hackaday Prize

The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin.

Turnado Hardware MIDI Controller

liam-lacey Liam Lacey

The 2015 Hackaday Prize

This is an IoT based wireless Home Automation and Security System

Low Cost Wireless Home Automation and Security

sounak-ranjan-das Sounak Ranjan Das

Interfacing 3.5" HD 1.44 MB Floppy drive through FDD connector with Arduino UNO

Arduino raw data 3.5" Floppy reader

lukas-vacek Lukas Vacek

Or how I try to create an exact mechanical (and functioning) replica of the Apollo Guidance Computer DSKY

Accurate Apollo DSKY Replica

mdasilva M.daSilva

Hackaday Prize 2019

3D printed fully customizable exoskeleton arm development kit

3D Printed Exoskeleton Arm

kristjan-berce Kristjan Berce

2021 Hackaday Prize

the FIRST Single-board DIY 8-bit Personal Computer with VGA, Mice, Ethernet and Printer support, GPIO and CP/M powered!

CRISS CP/M 8-bit Homebrew DIY Computer (AVR based)

A low cost bed upgrade that adds a second slave heater to allow the bed to reach 110C and also makes the bed flatter and more rigid.

Monoprice Mini 3D Printer Bed Upgrade

Emulate Citroen's Lexia / Actia Diagnostics tool to query the CAN bus and log the results to SD card.

CAN Diagnostics Logger with Arduino CAN shield

View all

Bits