0%

0%

Paul Philip Mitchell

Blabla

Norway

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 02/21/2021.

Projects I Like & Follow

Project for a vacuum cleaner robot garage with Home Assistant integration. Save space - park your vacuum cleaner under the kitchen cabinet.

Vacuum Robot Garage with Home Assistant

Released in late 2007 NAND Flash capacity was still very limited (4GB and 8GB MLC). But is it possible to replace the aging NAND Flash?

iPod Nano 3rd Gen MLC NAND Upgrade & Software Hack

hugo-melder Hugo Melder

Use a Kodak projector and DSLR camera to automate digitizing slide photography

Kodak Slide Projector Scanner

bryan-howard Bryan Howard

Make a Raspberry Pi replacement using a Cypress Semiconductor Programmable System on a Chip (PSOC 5)

Not Quite Useless Raspberry Pi Replacement

land-boardscom land-boards.com

The 2018 Hackaday Prize

Unique, compact power conditioning enables always-on sensor monitoring and Long-Range radio (LoRaWAN) link for IoT applications.

SoLoRa - Solar Powered always-on IoT sensor node

joe-miller Joe Miller

Finally checked off designing a nixie clock from scratch from my bucket list

DIY Nixie Clock

sjm4306 sjm4306

Crude door phone and RFID lock project for my yard gates door

ESP8266 door phone

DSO functions for a CRO

A digital camera for analog oscilloscopes

joseph-eoff Joseph Eoff

Combine an ultrasonic ranging sensor with some addressable LEDs to help position your car in the garage with accuracy

ESP32-based Precision Parking Assist

Create a home automation gateway, you can access from anywhere, using a Raspberry PI, Sonoff switches with Tasmota and FlashLex.

Internet Accessible Home Automation with Sonoff

clay-graham Clay Graham

a cost $1, actually even less, solution for Bluetooth 4.1

<$1 Bluetooth 4.1 Solution

Hackaday Prize 2019

Gone are the days of waking up in the night, forcing your eyes open to check the time, and then blinding yourself with your phone backlight!

HapticEye Clock

michael-kafarowski Michael Kafarowski

Using AT commands we can change name,bud rate etc of Bluetooth module(hc-05,06)using some simple steps.

Change your Bluetooth properties using AT commands

This workshop is focused on reverse engineering and utilizing hardware-level debuggers.

Remoticon: The Hackers Guide to Hardware Debugging

A simple semiconductor current/voltage trace plotter. It requires only an Arduino and a handful of passive components.

Rodriguez - The World's Slowest IV Tracer

joseph-eoff Joseph Eoff

A vintage bus display becomes a clock

Flip Dot Clock

Bluetooth that actually works...

Bluetooth For 2008 Chrysler Grandvoyager

saabman Saabman

LED Volume Meter is an Equalizer in the Music Systems. In which lights dancing (LEDs) can be seen according to the song,

LED VU Meter PCB design using KiCAD

View all

Bits