0%

0%

Pravin

Outreach Coordinator | Kaiarawhiti, Engineering and Computer Science, Victoria University, Wellington. CS/Robotics educator #ECSOutreach

Wellington City, New Zealand

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 01/26/2020.

My Lists

HAM Radio

Anything with Radio/Satellites/Amateur Ham

Curated by Pravin

Projects I Like & Follow

If you need a refresher for digital logic before tackling FPGAs, this is the bootcamp for you!

FPGA Bootcamp #0

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

Julian Fernandez

The 2018 Hackaday Prize

The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin.

Turnado Hardware MIDI Controller

A re-creation of the minimoog using Teensy 4.0

Teensymoog

Hackaday Prize 2019

Armed with a Nerf blaster. This turret tracks and shoots down micro drones, otherwise know as "Tiny Whoops"

Anti Drone Gun Turret

Not only less wires, but print faster and more stable

Bluetooth hotend for 3D printer

A couple of cheap dummy loads for testing radios

The $50 Ham: Dummy Loads

LoRa 2.4Ghz module used in full duplex mode, sending/receiving MavLink telemetry data

LoRa 2.4 Ghz for drone telemetry

Blast your enemies from a safe distance !!!

Bluetooth Nerf turret

little french kev

My take on an autonomous satellite image collector grabbing from NOAA 15/18/19. (Leave Behind - Collection Device)

NOAA LB-CD

Here we will establish a connection between the HC-05 ( connected to ATmega8 ) and an android Bluetooth app to blink a LED.

Interfacing HC-05 Bluetooth module with ATmega8

electronicsforgeeks

3D printed ball screw actuator focusing on minimal cost.

3D Printed Ball Screw Actuator

Hackaday Prize 2019

The intent behind the Ultra Servo is to give a maker or a robotics a powerful building block.

Ultra Servo V2.0

This is an audio application that produces 3D binaural audio from 2D mono audio samples and positional information given by GUI.

Binaural Audio Editor

Pablo Antonio Camacho Jr.

The 2018 Hackaday Prize

My 2018 Hackaday Open Hardware Project involves resetting a cordless phone when an elderly neighbor does not hang up

Cordless phone RESET when off - hook & no audio

Boelens, Leland

Arduino based signal converter, enabling stalk remote in Renault Clio to control JVC radio.

Clio2JVC

Final year project for Uni.

Portable Espresso machine

Device used with Invacare pendant controller

Voice Controlled Hospital Bed Remote

View all

Bits