0%

0%

Phil Diefenderfer

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 01/20/2018.

My Projects

I used my 3D printer to replicate a part of an old, hard to find, model train car.

Lionel Coal Car Replacement Part

Phil Diefenderfer

Projects I Like & Follow

The 2016 Hackaday Prize

Mechaduino is an affordable, open-source, industrial servo motor. Position, torque, velocity, and custom modes. Arduino compatible.

Mechaduino

full telescope control over WiFi using INDI on a RPi Zero W

Raspberry Pi Driven Telescope Mount

The 2017 Hackaday Prize

4+ custom bands multispectral camera based on RasPi 3 and raspi camera multiplexer with geotagging and environmental montoring capabilities

RPi Multispectral Camera for Agriculture

Andres Felipe Gomez R.

A low cost bed upgrade that adds a second slave heater to allow the bed to reach 110C and also makes the bed flatter and more rigid.

Monoprice Mini 3D Printer Bed Upgrade

Yet another IR-blaster, but this time with CEC (and WIFI)

IR-blaster with CEC

Project homepage & downloads: https://sites.google.com/view/flips-cubicle

LED Cube RGB 12x12x12 powered by Raspberry Pi

Slide this Japanese style hand plane along any rough corners to give them a clean chamfer (AKA beveled edge). Uses a standard razor blade.

3D Printed Chamfer Tool

Smart, wifi capable thermostat that can be remotely accessed through the internet to record data and adjust setpoints.

Arduino Due Thermostat

2021 Hackaday Prize

A 3D Raycasting engine to run on an Arduino with a 32x16 LED matrix panel instead of a screen.

Arduino LED Raycaster

ATtiny84-based gamed of life on 8x8 LED matrix with manual setup of 1st generation.

Conway's Game of Life on ATtiny84

Jean-François Poilpret

RPi 2 + 2 TB HDD + Bittorrent Sync = Secure server accessible from anywhere

RPi Bittorrent Sync Server

Middle school project to create a harp where the strings are laser beams. Learning about circuits, CAD, and computer programming.

Laser Harp (CNC, Pi zero)

Make a DIY Time Clock to monitor your employee's arrivals and transform your workplace in a Smart Office for less than $40!

DIY IoT Time Clock for Smart Office

The 2017 Hackaday Prize

a simple power supply unit for hobbyist with real time short circuit protection

Protected power supply for development boards

Akash Kollipara

The 2016 Hackaday Prize

A touch and eye controlled communication system with ease of use as the paramount goal.

SquareVoice

This project goals to please our dear citizens with the greatest advancements in displaying technology.

Split-Flap Display

Access GPIO of Arduino from Raspberry Pi using Firmata & JAVA

Access GPIO of Arduino from Raspberry Pi

Trigger via voice command a smooth ambience system that turns off your main lights, turn on smooth lighting and starts relaxing music

Smooth Ambience System With Voice Command

View all

Bits