Quantity | Component name | |
1 | × | Arduino Nano main processor |
1 | × | holtek ht16k33 used to control all lights and the keyboard |
2 | × | MCP23017 port expander for the plugboard |
4 | × | alphanumeric digits what the "rotors" shows |
4 | × | rotary pulse encoder, similar to KY-040 but a shorter shaft is needed input for the rotors |
30 | × | tactile keys for the keyboard and switches under the rotors |
26 | × | panel mounted banana jacks for the plugboard |
1 | × | 2P6T switch Mode selection and on/off, 2 pole 6 throw. |
1 | × | 74hc02 Electronic Components / Misc. Electronic Components |
1 | × | 74hc4002 Logic ICs / Gates and Inverters |
26 | × | LEDs light bulb replacement |
3 | × | alphabet stickers A-Z for lampboard, keyboard and plugboard |
31 | × | Key caps |
1 | × | PCB kit Kit of 3 large circuit boards |
26 | × | TVS diod for ESD supression on the plugboard |
1 | × | resistors A few resistors to be used for pullup |
1 | × | Sound board small mp3 sound board for some of the sound |
1 | × | Powersource 2xAA and a battery to 5V buck-up converter is what the board is designed for |