0%

0%

c_rittmacher

A small 4017 based 10 step stepsequencer

Following Follow project

Liked Like project

Become a Hackaday.io member

OR

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

OK, I'm done! Skip

Similar projects worth following

Description

A very simple step sequencer based on the baby10 sequencer schematics

Details

A stepsequencer roughly based on the Baby 10 schematics

Components

1 × CD4017 Electronic Components / Misc. Electronic Components
1 × NE555 Discrete Semiconductors / Power Transistors and MOSFETs
10 × BC547B Discrete Semiconductors / Transistors, MOSFETs, FETs, IGBTs
10 × LED Fiber Optics / Emitters
1 × TEKO 362.8 Case

Project Logs

Collapse

PCBs arrived
WooDWorkeR • 04/20/2016 at 12:22 • 0 comments

The PCBs from Dangerous Prototypes dev Shop arrived. The look pretty good. I hope i did not make big mistakes and this works.
As soon as i got a board together i'll post another update.
The PCB
WooDWorkeR • 03/21/2016 at 23:04 • 0 comments

Today i sat down to get the schematics and PCB routing to the first done step.
Pretty happy with the routing, but i think i still need to breadboard the circuit again - not really sure about the opamp buffer for the CV and the gate-in circuit.

View all 2 project logs

Discussions

Yann Guidon / YGDES wrote 04/15/2018 at 20:33

When there is a 4017, the project can't be too bad !

Are you sure? yes | no

Dr. Cockroach wrote 04/15/2018 at 16:04

I plan on hacking a diode/transistor 4017 later this year. Your layout looks good :-)

Are you sure? yes | no

Similar Projects

Shield for CLP-DUINO

CLP-DUINO Shield Relay

jefferson-bueno Jefferson Bueno

Are you willing to create a PCB Business card which shows how talented you are! then this will be the best guide to assist you.

How to Make a PCB Business Card

diy-guy-chris DIY GUY Chris

A total rip off of the filthy cheap "tesla coil" kits on ebay/aliexpress, rejangled onto a square inch PCB for the contest.

µTesla - One inch tesla coil

Hi guy today we Make 300 Watt Fer Channel Stereo Amplifer, Simple Circuit and PCB.

HOME MAKE 300 WATT FER CHANNEL STEREO AMPLIFER, SI