07/24/2018 at 12:14 •
Just finished the Software for my Coil winding machine. I used my Arduino Nano QP .
It was perfect for this project.
The source code can be found on my github.
04/12/2018 at 12:12 •
Now, I have the Magnets, let us wrap the coils. I will use painted copper wire with a diameter of 0.09mm.
Both of the coils should have 40 Ohm at the end, which makes a lot of wrapping.
So I decided to build me this Coil-O-Mat to make me this task easyer
Hopefully I will finished this quickly, so I can start to do the first tests with the e.m.p.
04/08/2018 at 17:56 •
Today I found a few moments to prepare the parts for my first piston prototype.
They are laser-cut and it seems that the results looks like my cad design.
A Neodymium magnet, 3mm of diameter and 10mm length fits in the middle of this design.
And the hole thing fits in the tube and moves.
04/07/2018 at 16:01 •
I use one of these plexiglas tubes
Then I laserd 4 Water inlets in the tube
Next step will be the piston ... stay tuned
04/05/2018 at 21:30 •
The 10 Watt solar panel is now ready for the first tests, if the sun shows up this weekend :)
And here comes the sun 22,42V with no load.