Close

Building process

A project log for Raspberry Pi Retro Gaming LED Display

20x10 WS2812 LEDs driven by Raspberry Pi/Arduino to play games like Tetris in the living room

maketveemakeTVee 04/15/2016 at 18:080 Comments

Matrix construction was done in DesignSpark Mechanical (Free CAD tool from RS, win only :-( )

I used the Lasercutting service offered by Formulor.

10 LED-stripes with 20 LEDs of each (WS2812, 30 LED/m) were placed on the backplane before putting all the pieces together.

First test after assembling:

In the lower section, all the electronic is placed but still can be removed from the back side even after placing the veneer.

Finished matrix with veneer surface:

Discussions