Building the hardware:

1. Clone the following repository box0-v5-hardware.
2. Send the box0-v5-hardware/manuf/ files for manufacturing.
3. Buy the components as given in BOM (or hackaday page) box0-v5-hardware/box0.csv
4. Populate the components.
5. Clone the following repository box0-v5-firmware
6. Flash the firmware (via DFU - see README) as given in box0-v5-firmware/extra/dfu-script
7. At this point, after re-plugging, the blue LED should come up

Building libbox0 (cmake build system)

1. Clone the repository libbox0
2. see README and install all required dependencies
3. goto the root of the repository.
4. `$mkdir build` - make a directory to keep build files.
5. `$cd build` - enter in build directory
6. `$cmake ..` - tell cmake that build files are in parent directory and prepare for build
7. `$make` - build libbox0. (you can use `make -j4` to speed up. the 4 signify the number of processor to use. warn: it can hang while building.
8. `$make install` - install the binary and header

You can install the binaries and header to non-standard location but require advanced steps. (only simple for now)

Building libreplot (cmake build system)

1. Clone the repository libreplot
2. see README and install all required dependencies
3. goto the root of the repository.
4. `$mkdir build` - make a directory to keep build files.
5. `$cd build` - enter in build directory
6. `$cmake ..` - tell cmake that build files are in parent directory and prepare for build
7. `$make` - build libbox0. (you can use `make -j4` to speed up. the 4 signify the number of processor to use. warn: it can hang while building.
8. `$make install` - install the binary and header

You can install the binaries and header to non-standard location but require advanced steps. (only simple for now)

Building Box0 Studio (cmake build system)

• Clone the repository box0-studio-qt
  
• see README and install all required dependencies
• goto the root of the repository
• `$mkdir build` - make a directory to keep build files.
• `$cd build` - enter in build directory
• `$cmake ..` - tell cmake that build files are in parent directory and prepare for build
• `$make` - build Box0 Studio. (you can use `make -j4` to speed up. the 4 signify the number of processor to use. warn: it can hang while building.
• (optional) `$make install` - install the binary

Building LiaB Studio (cmake build system)

• Clone the repository liab-studio-qt
• see README and install all required dependencies
• goto the root of the repository
• `$mkdir build` - make a directory to keep build files.
• `$cd build` - enter in build directory
• `$cmake ..` - tell cmake that build files are in parent directory and prepare for build
• `$make` - build LiaB Studio. (you can use `make -j4` to speed up. the 4 signify the number of processor to use. warn: it can hang while building.
• (optional) `$make install` - install the binary

Connect box0-v5 (Box0 hardware) and start Box0 Studio -> Oscilloscope and have fun!

TODO: add step for building Box0 Studio - Android

TODO: add step for building LiaB Studio - Android

TODO: add a note that hard to repositories like libcsv, lmfit are kept in madresistor gitlab page. (did i actually do that? :)

TODO: installing various programming language bindings