Close

POF optical cable testing...

A project log for LabX

Free Tools for all: Change any FPGA to lab instrument

antti-lukatsAntti Lukats 04/17/2016 at 17:570 Comments

Maybe not so impressive pic, but it is done with custom-board LabX design, 12MHz was sent to POF Transceiver, the red light did go into that funny plastic optical fiber and then back into FPGA. Oversampled with 250MHz 4 times, so there are 4 sampels for bit period. I had 250MB/s POF transceiver that I wanted to test.

The LabX design was made with mouse only no manual coding involved at all.

Discussions