(extreme) soldering Part One

A project log for 192:LED

Extreme tiny (0,68'‘ x 0,68’‘ or 17mm x 17mm) smart RGB LED display/matrix

alexAlex 05/25/2016 at 19:257 Comments

The bottom side is soldered. It was quite difficult to get the 0201 capacitors (the two next to the crystal) soldered correctly. The dimension of crystal is 2 x 1.6 mm.

Next Task is to solder the to side with its 64 RGB Leds. But I will not do that today. One side a day extreme soldering is enough. And then I hope it will also work.


aishamontrset wrote 05/28/2016 at 05:40 point

nowone   is    scairdy  cats

  Are you sure? yes | no

aishamontrset wrote 05/28/2016 at 05:39 point

i  dear   someone  ton  toghch  one!

  Are you sure? yes | no

zakqwy wrote 05/27/2016 at 13:53 point

whoa 0201s! Well done!!

  Are you sure? yes | no

oshpark wrote 05/27/2016 at 05:40 point


  Are you sure? yes | no

Eric Hertz wrote 05/27/2016 at 07:10 point

seconded! Thems some tiny capacitors!

  Are you sure? yes | no

K.C. Lee wrote 05/27/2016 at 09:23 point

Good job on placing those caps.

  Are you sure? yes | no

Alex wrote 05/27/2016 at 13:36 point


  Are you sure? yes | no