This is a rough plan of how the electronics will be joined up.
9V Battery->Diode(s)->5V rail -> All digital components.
Piezo->MCU
HX711->MCU (2 wires)
HT1621->MCU (3 wires, one shared with HX711)
LCD->HT1621 (Built into carrier board)
Half bridge+Set resistors -> HX711 (build on protoboard)
Reset-switch->MCU (build on protoboard)
Discussions
Become a Hackaday.io Member
Create an account to leave a comment. Already have an account? Log In.