Close

Print of the day

A project log for uTopiaPrinter (SLA)

An resin 3D Printer working with LCD and UV LED's.

Sébastien Mischler (aka skarab)Sébastien Mischler (aka skarab) 08/01/2016 at 12:163 Comments

Lift speed: 80mm/min
Layer height: 0.1mm
Exposure time: 8s
Time: 1h47

Without supports!

File : Adalinda - The Singing Serpent by Louise Driggers

Discussions

Jorge wrote 08/13/2016 at 00:34 point

Few hours of life is the light source?

  Are you sure? yes | no

Jorge wrote 08/13/2016 at 00:29 point

Hi.
You could develop a 3D printer using the Kickstarter crowdfunding.
Search in XYZ resolution of 25 microns. use resins third possibility.
I would like to be a Backer of your project.

  Are you sure? yes | no

Sébastien Mischler (aka skarab) wrote 08/13/2016 at 06:02 point

Hello Jorge,

Thank you for your interest.
I will not make immediately a kickstarter campaign, but I plan to produce some alpha kits.
I would like to be sure that what I'm going to sell works well and for a long time.

  Are you sure? yes | no