1 |
× |
Seeeduino Stalker v3.1
A cheap Arduino UNO derivative with adjustable logic level (3.3v or 5v)
|
1 |
× |
Sensor shield
Convenient breakout for arduino pins with electronic brricks interfface
|
1 |
× |
Mini USB cable
Gotta program it somehow
|
1 |
× |
SIM808 GSM GPS GPRS module (Itead)
Breakout for the sim808 chip with a battery charger, antenna connectors and control pins
|
1 |
× |
GSM antenna
GSM antenna with u.FL cable
|
1 |
× |
GPS active antenna
A convenient GPS antenna with magnetic mount
|
2 |
× |
SMA to u.FL connector cable
For connecting antennae to the SIM808 breakout NOTE: antennae we used are shipped with these
|
1 |
× |
Li-Ion battery, 3.7v 4400mAh
More than enough juice to keep it running till sun comes out
|
1 |
× |
5v 400mA Monocrystalline PET solar cell
To keep the battery charged
|
16 |
× |
4-pin crimp connector housing
For HC-SR04 wiring
|
20 |
× |
26AWG wire with pre-crimped terminals, 90cm
For HC-SR04 wiring
|
12 |
× |
26AWG wire with pre-crimped terminals, 60cm
For HC-SR04 wiring
|
3 |
× |
4x1 male header pins
For connecting wires to desired lengths
|
5 |
× |
Ultrasonic range finder HC-SR04 3.3v variant
Pings the bottom of the can to check how much trash's inside
|
1 |
× |
1x4 female-female jumper wire, 20cm
For the tmperature sensor
|
1 |
× |
Temperature Sensor Brick
Semi-conductor type, precise around 25 deg Celsius
|
1 |
× |
2-pin JST-PH cable
To connect solar panel and battery
|