diy-VT100 Crowdfunding

We are excited to officially announce crowdfunding of diy-VT100!

diy-VT100: A hardware terminal with all the bells and whistles.

We have been working with Crowdsupply on the pre-launch page of diy-VT100.

We are at the last step of making diy-VT100 to everyones lab. This is your moment, signup now on the pre-launch page and get notified when the crowdfunding is active.

diy-VT100 will have atleast Rev. 4 features.

5 Inch LCD (800×480 Pixels)
Digital To Analog converter based sound (feep! feep!)
USB and PS/2 Keyboard support
Preference saved in EEPROM
Dedicated SETUP button

Full details on the pre-launch page.

At backend, we have been communicating with suppliers and manufacturers to confirm all parts and plans.

Source: https://madresistor.com/blog/diy-vt100-crowdfunding/

Discussions

Chuck Gulotta wrote 01/30/2019 at 17:51

What is the status on this? is it dead?

Are you sure? yes | no

Mark Traverse wrote 01/20/2018 at 09:24

is this going to be available via crowd funding?

Are you sure? yes | no

Kuldeep Singh Dhaka wrote 01/27/2018 at 09:15

Campaign has been suspended. :/

Are you sure? yes | no

Alice Wyan wrote 05/16/2019 at 20:03

what happened? the project looks cool!

Are you sure? yes | no

Stephan Forth wrote 01/08/2018 at 14:42

The crowdfunding link does not work :-(

Are you sure? yes | no

Complete source code & Hardware design of diy-VT100

diy-VT100 Revision 5 Changes

Discussions

Become a Hackaday.io Member