Quantity   Component name
1 × PXI PAK9125LS-TKIT Optical tracking sensor sample kit
1 × Teensy 3.1 microcontroller
1 × B: PXI PAK9125LS-TKIT Optical tracking sensor sample kit - For Beta
1 × B: Two pin level converter board with regulator Generic - DX or gear best? - For Beta
1 × B: Adult sized silicone pacifier Amazon - For Beta
2 × B: Conductive rubber force sensor <a target="_blank" rel="noopener noreferrer" href="http://www.inaba-rubber.co.jp/en/b_products/inastomer/srd.html">http://www.inaba-rubber.co.jp/en/b_products/inastomer/srd.html</a> - For Beta
1 × B: MPL115A2 absolute pressure sensor For Beta
2 × B: 4.7K resistors For Beta
2 × B: Balance resistors for force sensors Something like 20K is probably best - For Beta
1 × B: 5 conductor shielded wire
1 × Adult sized silicone pacifier
1 × Conductive rubber force sensor <a target="_blank" rel="noopener noreferrer" href="http://www.inaba-rubber.co.jp/en/b_products/inastomer/srd.html">http://www.inaba-rubber.co.jp/en/b_products/inastomer/srd.html</a>
1 × Single turn 10K potentiometer
8 × Jumper wires
2 × 4.7K resistors i2c pull-ups
2 × Zip ties
1 × B: VL6180X Time of Flight Sensor Breakout <a target="_blank" rel="noopener noreferrer" href="https://www.adafruit.com/product/3316">https://www.adafruit.com/product/3316</a> - For Beta
1 × B: CJMCU-Beetle ATMEGA32U4 breakout <a target="_blank" rel="noopener noreferrer" href="https://www.amazon.com/dp/B011AYAOHS">https://www.amazon.com/dp/B011AYAOHS</a> - For Beta