0%

0%

Millable Inline Passive Attenuator

Linear attenuation for control voltage signals for desktop mills.

Following Follow project

Liked Like project

Become a Hackaday.io member

OR

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

OK, I'm done! Skip

Similar projects worth following

Description

These attenuators sit between two patch cables. Based on other popular designs, they require no power and save rack space. Mill on fr-1 single sided PCB blanks.

Details

Files

pot2.btm Bantam Tools project btm - 36.00 kB - 05/09/2018 at 19:26		Download
pot2.brd Eagle Board brd - 24.71 kB - 04/27/2018 at 21:42		Download
pot2.sch Eagle Schematic sch - 20.40 kB - 04/27/2018 at 21:42		Download

Components

1 × FR-1 Single sided PCB blank
2 × PJ302M Jack 3.5mm 1/8 Female Audio Connector
1 × 50K Snap In Potentiometer 9mm 50K Linear Taper Potentiometer

Project Logs

Collapse

Resisting
Richard Hogben • 04/28/2018 at 00:34 • 0 comments

Low, mid, and high.

View project log

Build Instructions

Collapse

1

Import and layout the brd files
2

Prep the material
3

Start milling

View all 4 instructions

Discussions

Similar Projects

This amplifier can output a maximum of 100watts and capable to run a 10 inch subwoofer. It is based on high fidelity 7498 IC. Follow design

I Made this Powerful Class D Amplifier

sagar-001 Sagar 001

Adjustable Low EMI Switching Power Supply

Adjustable Low EMI Switching Power Supply

hesammoshiri hesam.moshiri

Low Noise 45V-4A Dual Rail Power Supply Using Enhanced Capacitance Multiplier

Low Noise 45V-4A Dual Rail Power Supply

hesammoshiri hesam.moshiri

It is 5.1 channel amplifier board consisting of dedicated high fidelity IC for subwoofer and speakers. Let's build one as party boom box

Making a 200watts 5.1 channel Audio Amplifier

sagar-001 Sagar 001