DIY Taser Glove

A glove you can wear that houses 3 taser units with brass screw electrodes on the knuckles. Button press activation on the index finger.

Tommy Callaway

Following Follow project

Liked Like project

Become a Hackaday.io member

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

OK, I'm done! Skip

Similar projects worth following

3.4k views

0 comments

2.9k followers

20 likes

View Gallery

Description

I wanted to build some taser gloves, and the version I wanted didn't really exist. I found some supplies which in total cost less than $40 and built my own.

Details

This project is potentially dangerous so you shouldn't attempt it if you don't have training on how to safely deal with electricity. I've always been interested in electronics and decided to make my own taser gauntlet / stun glove.

Tools Needed:

Hot glue gun

drill

soldering iron

solder

some sharp, short copper or brass screws

wire strippers

9v batteries

I completed this project in about 3 hours of work. I only had short sprints to work on it, so you see my clothes change a few times.

Components

3 × 400kv transformer / generator ranging between $2 and $8. http://amzn.to/2dbzlLJ
1 × 2 pin toggle switch $8: http://amzn.to/2dbzKO8 (3 pack)
1 × Square momentary button $6 (3 pack): http://amzn.to/2dsqWVn
1 × 18 ga stranded wire $7: http://amzn.to/2dbzI8X
1 × Any glove you want to use I used this one from home depot for $14: http://thd.co/2cYWeay