Project Logs

Collapse

• CR-10S value output

  davedarko • 01/09/2020 at 21:28 • 0 comments

  start
  echo: External Reset
  Marlin 
  echo: Last Updated: 2015-12-01 12:00 | Author: (CR-10Slanguage)
  Compiled: Apr 18 2018
  echo: Free Memory: 1024  PlannerBufferBytes: 1232
  echo:Hardcoded Default Settings Loaded
  echo:Steps per unit:
  echo:  M92 X80.00 Y80.00 Z400.00 E93.00
  echo:Maximum feedrates (mm/s):
  echo:  M203 X300.00 Y300.00 Z5.00 E25.00
  echo:Maximum Acceleration (mm/s2):
  echo:  M201 X500 Y500 Z100 E5000
  echo:Accelerations: P=printing, R=retract and T=travel
  echo:  M204 P500.00 R500.00 T1000.00
  echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s),  Z=maximum Z jerk (mm/s),  E=maximum E jerk (mm/s)
  echo:  M205 S0.00 T0.00 B20000 X5.00 Z0.40 E5.00
  echo:Home offset (mm):
  echo:  M206 X0.00 Y0.00 Z0.00
  echo:Material heatup parameters:
  echo:  M145 M0 H185 B0 F0
  echo:  M145 M1 H240 B0 F0
  echo:PID settings:
  echo:  M301 P22.20 I1.08 D114.00 C100.00 L20
  echo:Filament settings: Disabled
  echo:  M200 D3.00
  echo:  M200 D0
  echo:SD card ok
  Init power off infomation.
  size: 
  591
  init valid: 
  0
  0

  After activation of linear advance with .4 nozzle:

  M900

  Advance K=0.50
  

View project log