Close

Soon...

A project log for Rainbow Jellyfish

Convenient indicator LEDs for your breadboard

ꝺeshipuꝺeshipu 12/12/2018 at 10:478 Comments

Discussions

Morning.Star wrote 12/14/2018 at 08:05 point

Wouldnt it be easier to stick the strips face down on coloured Avery label and then cut them up? ;-) Thats a bit messy...
You could even print legends for each individual component if you wanted.

  Are you sure? yes | no

ꝺeshipu wrote 12/14/2018 at 09:18 point

Too much work. I have to make dozens of them, and they need to be cheap.

  Are you sure? yes | no

K.C. Lee wrote 12/14/2018 at 14:03 point

Hole punch + color self adhesive labels to make color dots.

  Are you sure? yes | no

Dave's Dev Lab wrote 12/13/2018 at 04:36 point

painting the strips the color of the LED?

  Are you sure? yes | no

ꝺeshipu wrote 12/13/2018 at 09:06 point

Yes. I had to mark them somehow, and it's faster to do it like this, before they are cut into individual components. I've stolen the idea from @davedarko who used a marker, but I didn't have markers handy, so I used acrylic paint instead.

  Are you sure? yes | no

Dave's Dev Lab wrote 12/13/2018 at 19:00 point

hehe, yea, seems a lot of people thinking that way! i did it recently on a kit project: https://hackaday.io/project/24900/gallery#2cb4af8ada4bfc24712ff378a68040df

  Are you sure? yes | no

titimoby wrote 12/12/2018 at 16:02 point

a new batch is coming?

  Are you sure? yes | no

ꝺeshipu wrote 12/12/2018 at 16:22 point

yes, it's on tindie already

  Are you sure? yes | no