Close
0%
0%

Quin the Quadruped

A quadruped with custom 3D printed legs and locomotion software written in Python on a Raspberry Pi

Public Chat
Similar projects worth following
This is a quadruped robot with MG92B micro servos.

Standard Tesselated Geometry - 973.13 kB - 07/16/2018 at 18:30

Download

Standard Tesselated Geometry - 404.18 kB - 07/16/2018 at 18:30

Download

Standard Tesselated Geometry - 501.16 kB - 07/16/2018 at 18:30

Download

Standard Tesselated Geometry - 979.77 kB - 07/16/2018 at 18:30

Download

Standard Tesselated Geometry - 973.13 kB - 07/16/2018 at 18:30

Download

View all 9 files

  • Working on custom gates

    Bryce07/24/2018 at 18:25 1 comment

    so far, all locomotion of the robot was done by using sine and cosine waves with different amplitudes and frequencies, but my goal now is to have a custom gait visualizer and editor. So far its been going well, albeit inefficient and not as accurate as I would have hoped. There are a few glitches, but this is it so far: https://github.com/BrrrIce/Robot

View project log

Enjoy this project?

Share

Discussions

Mike Szczys wrote 07/24/2018 at 16:20 point

Excellent kinematics demo in that video! I can't wait to read more information on this project!

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates