Close
0%
0%

Blinking Business-card Badge (B3)

Blinking electronic business card with NFC

greggreg
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
1.5k views
1 comments
10 followers
View Gallery
Reduce, Reuse, Recycle with this durable business card. Instead of filling landfills with dead trees, you can fill the bits in their contact folder by sharing your VCARD with a simple tap. The logo glows when the tag is read to acknowledge the transaction. There are also holes in the corners so that you can mount it, or wear it if you feel the need to join #badgelife.

This design uses the ST25DV04 to share contact information through NFC.  It takes advantage of the energy harvesting function to light up the logo when the tag is read.  The logo is lit by reverse mounted LEDs shining through the board from the back side.

The easiest way to configure the part is with one of the mobile apps provided by ST on their website.  See the instructions for more details on configuration.

The design is available at Upverter.  All the parts are available from Mouser and you can find links in the bill of material at Octopart.

  • 1 × ST25DV04K-IER6T3 RFID Transponders 4-Kbit Dynamic NFC/RFID tag NFC Forum type V with I2C interface, fast transfer mode and energy harvesting
  • 3 × VLRK31Q1R2-GS08 LEDs and Accessories / Light Emitting Diodes (LEDs), Reverse Gullwing
  • 3 × 2SK3666-2-TB-E JFET, N-ch, SC-59-3, 1.5mA
  • 1 × 0.01uF Capacitor 0.01uF 0402 Capacitor
  • 1 × PRT-14417 Qwiic Connector SparkFun Accessories Qwiic JST Connector- SMD 4-pin

View all 2 project logs

  • 1
    Assemble Board

    Install all components on the board in the proper orientation.

  • 2
    Get the mobile app to configure the tag

    Follow this link and get the application executable for your platform:

    https://www.st.com/en/nfc/st25dv04k.html#sw-tools-scroll

     STSW-ST25001 for Android or STSW-ST25IOS001 for iOS

  • 3
    Enable energy harvesting

    The default option for energy harvesting is "on demand", so you need to change it to "forced after boot" to get the card to light up whenever it is read.  To do this with the Android app, go to the menu and open "Register Management".  EH_Mode is the third register, change the value to 00 and click the disc in the upper corner to save it to the device.  It will prompt you for the configuration password which is all zeros by default, so just click OK.

View all 4 instructions

Enjoy this project?

Share

Discussions

oshpark wrote 03/07/2019 at 20:43 • point

Very cool design!

  Are you sure? yes | no

Similar Projects

A Friday Hacks project adding an NFC/RFID lock system to our local office, powered by a Raspberry Pi 3 and resin.io
Project Owner Contributor

Resinified Office Lock

joeJoe

A Fully Open Source SmartPhone Using The C.H.I.P Pro
Project Owner Contributor

C.H.I.P SmartPhone

ricardo-ferroRicardo Ferro

A 6809-based project- a simple board that's intended for 6809 OS'es that run in 64k of memory and work with a serial console
Project Owner Contributor

6809 v2

david-woodDavid Wood

I've modified a card reader to play a tune.
Project Owner Contributor

Swipe Card Music Player

evacevac

Does this project spark your interest?

Become a member to follow this project and never miss any updates

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "Blinking Business-card Badge (B3)", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.