Close
0%
0%

LED Polarity Detection Device

Telling Anode from Cathode

xx
Similar projects worth following
Support device for testing/orienting LED's for the SMD Solder Challenge.
  • 1 × CR2032 Battery Holder
  • 1 × CR3032 Battery
  • 1 × Resistor LED Current Limiter

Enjoy this project?

Share

Discussions

mscott wrote 01/11/2019 at 19:12 point

The internal resistance of a 2032 coin cell is high enough that the resistors aren't necessary.

Simply slide the cell between the LED leads and the LED will light when the polarity is correct.

  Are you sure? yes | no

raylearmond wrote 01/09/2019 at 20:39 point

Why don't you include the resistor size in the Components?  Colors are deceiving.  

  Are you sure? yes | no

Mike Szczys wrote 01/08/2019 at 14:44 point

These really saved our butts at Supercon for the SMD challenge. Thanks for digging into your personal stash and putting these together!

  Are you sure? yes | no

Similar Projects

156
3
1
How to led
Project Owner Contributor

How to led

ProtocolProtocol

Does this project spark your interest?

Become a member to follow this project and never miss any updates