CC2531 USB Adapter Antenna mod

Back to project overview

How to correctly add an SMA Antenna to your ZigBee Sniffer / Gateway Adapter for increased range


B wrote 04/27/2019 at 22:01 point

I don't quite follow. Is this what you do?

  Are you sure? yes | no

roygbiv856 wrote 01/21/2019 at 02:17 point

What exactly do you mean by "solder the ground trace/bridge on the left side"? Are you talking about this little spot I highlighted where you also removed some solder mask?

  Are you sure? yes | no