Install Raspian on the RPI : https://www.raspberrypi.org/documentation/installation/installing-images/README.md

Download and setup the PIXLED server, as explained on github :

https://github.com/PixLed/PixLedServer

Download and intall the latest apk on your phone available here : https://github.com/PixLed/PixLedAndroid/releases

Hardware setup

• 5V power to LED and ESP32 with the same ground
• LED data PIN (12 by default)
• Set the LED Strip as backlight or put a diffuser to have as softer direct light : diffusers can be found on amazon.

Software :

It is recommended to work on a linux computer or on the RPI as it is easier to setup, but windows is supported.

Follow the Readme at : https://github.com/PixLed/PixLedDevice-ESP32 to configure and flash the modules.

Install your modules where they belong in your home.

Play with your setup as much as possible. Report any issue on the github and consider following the devepment on our Slack