Close

It's alive!

A project log for DLT one - A Damn Linux Tablet!

Modular Open Source Hardware Tablet that is easy to hack and can run a standard Desktop Linux Distribution (or Android)

Prof. FartsparkleProf. Fartsparkle 05/28/2019 at 22:252 Comments

So the PCB came yesterday and it looks super pretty! It's a 4 layer board with impedance control.
Also thanks to JLCPCB for sponsoring the board.



The best part is, after soldering it together, it was actually working! Well everything except for DisplayPort.

A friend suggested that I used the pin layout for a DP Sink instead of a DP Source. Who knew that existed! So you have the layout reversed depending on whether you transmit or receive the signal.
I tried reversing the connector but that unfortunately did not change anything. Will have to further investigate why.

Discussions

de∫hipu wrote 06/10/2019 at 16:15 point

> it was actually working

that simply doesn't happen

  Are you sure? yes | no

Richard Hogben wrote 06/10/2019 at 15:18 point

Nice looking board :)

  Are you sure? yes | no