Close
0%
0%

Simple Microcontroller (STM32) Breakout Board

Breakout board for STM32F030F4P6 for Quick Prototyping

Public Chat
Similar projects worth following
184 views
0 followers
Breakout board for STM32F030F4P6 (Cortex M0 TSSOP 20Pin). This simple board consists of the microcontroller, a crystal, and JTAG interface for debugging/flashing the code. It is useful for quick prototyping with a variety of peripheral sensors, and other slave devices before designing a custom board.

The board has been tested using Eclipse and ARM GNU toolchain on MAC. J-Link EDU MINI is used as the debugger.

Schematics, and layout were done in Eagle, and fabricated using OSH Park. The original files are available along with the BOM. Example code (blinky) and import instructions can also be found below.

Graphics Interchange Format - 3.47 MB - 04/10/2019 at 04:22

Preview
Download

BOM.xlsx

BIll of Materials

sheet - 37.92 kB - 04/09/2019 at 06:34

Download

STM32F03030F4P6_Breakout.brd

Eagle Layout file of the breakout board

brd - 113.84 kB - 04/09/2019 at 06:21

Download

STM32F03030F4P6_Breakout.sch

Eagle Schematic of the breakout board

sch - 379.42 kB - 04/09/2019 at 06:20

See BOM
Download

  • 1 × STM32F030F4P6 Microprocessors, Microcontrollers, DSPs / ARM, RISC-Based Microcontrollers Cortex M-0 20 TSSOP
  • 1 × NX8045GB-8.000M-STD-CSF-4 Frequency Control / Crystals 8MHz 8pF SMD
  • 1 × RNCP0603FTD10K0 Resistors (Fixed) / Thick Film Surface Mount (10k ohms 0603)
  • 1 × CL10C060CB8NNNC Capacitors / Ceramic (6pF 50V C0G/NP0 0603)
  • 2 × ‎PREC010SAAN-RC‎ CONN HEADER VERT 10POS 2.54MM

View all 6 components

View project log

View all instructions

Enjoy this project?

Share

Discussions

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates